Chrysler Grand Caravan Transfer case fluid is dirty Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(5,220)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(5,220)

Transfer case fluid is dirty Inspection Service

How much does a Transfer case fluid is dirty Inspection cost?

On average, the cost for a Chrysler Grand Caravan Transfer case fluid is dirty Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2022 Chrysler Grand CaravanV6-3.6LService typeTransfer case fluid is dirty InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2021 Chrysler Grand CaravanV6-3.6LService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
Show example Chrysler Grand Caravan Transfer case fluid is dirty Inspection prices

A transfer case is unique to all-wheel drive and four-wheel drive vehicles, sending power from the engine to the rear wheels. The transfer case is a sealed unit and may be either gear-driven or chain-driven depending on the manufacturer. Because the transfer case is a sealed unit, it requires lubrication to keep all of the moving parts clean and at a reasonable temperature. Transfer case fluid ensures the longevity of parts in the transfer case.

How this system works:

In four-wheel drive and all-wheel drive vehicles, a transfer case is either connected directly to the back of the transmission, or by a small driveshaft further back in the vehicle. When activated, the transfer case takes power from the engine to the back wheels. Depending on the kind of vehicle, power may go to the rear wheels on a full-time or part-time basis. All-wheel drive systems are typically on all of the time while a four-wheel drive system are activated by either pressing a button in the vehicle or by manipulating a selector lever, typically located near the transmission hump on the floor. In both systems, transfer case fluid keeps the internal parts of the transfer case lubricated. Over time, transfer case fluid will become dirty and break down. When transfer case fluid breaks down you may notice shuddering from the vehicle while turning or a whining noise from the gears in the transfer case.

Common reasons for this to happen:

  • Time: Over time, transfer case fluid will break down and become dirty. Dirty transfer case fluid may cause moving parts in the transfer case to have more difficulty moving, which may cause them to fail.

  • Improper Filling: If the transfer case is not properly filled with transfer case fluid, it may break down more quickly, have difficulty dissipating heat, and keeping parts lubricated.

What to expect:

A top-rated mobile mechanic will come to your home or office and determine whether or not your transfer case fluid needs to be replaced. If it does, he or she will then provide a detailed inspection report outlining the reason the fluid needed to be replaced and the cost of any repairs that may need to be made.

How it's done:

A mechanic will first have your vehicle idle for a few minutes to warm the fluid as warm fluid will drain easier. The mechanic will then drain the old transfer case fluid through the drain plug. The drain plug on most transfer cases is magnetic and picks up metal shavings that otherwise might potentially damage components in the transfer case. The mechanic should clean the drain plug before replacing it. The mechanic will then remove the fill plug and add new fluid. The mechanic should also double-check the amount of fluid, he or she puts in the transfer case, ensuring that it was done properly. A vehicle that is under-lubricated may not dissipate heat or protect critical components as well as a vehicle that is properly lubricated. When the transfer case is full, the mechanic will replace the fill plug and check for any leaks.

How important is this service?

By choosing to not replace your transfer case fluid, you may compromise critical and expensive components inside the transfer case. Because the transfer case is a sealed unit, it is very important that the transfer fluid is filled properly so that heat is appropriately dissipated and components to not suffer from unneeded friction. Repairing a differential can be very expensive, so in order to preserve these components, you should have you transfer case fluid replaced at the correct intervals. Doing so could potentially save you a lot of money down the road.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chrysler mechanics

Real customer reviews from Chrysler owners like you.

Excellent Rating

(5,220)

Rating Summary
4,833
202
37
34
114
4,833
202
37
34
114

Jamahl

20 years of experience
830 reviews
Jamahl
20 years of experience
Chrysler Pacifica V6-3.8L - Brake Pads Replacement (Front, Rear) - Winter Garden, Florida
professional. on time, neat and completed job in less time

Jennifer

19 years of experience
71 reviews
Jennifer
19 years of experience
Chrysler 300 V6-2.7L - Fuel is leaking from gas tank - Las Vegas, Nevada
Very friendly,personable and knowledgeable. I feel that I can rely on Jennifer to fix my automotive problem, thank you and he is a great asset to this company.

Jose

17 years of experience
433 reviews
Jose
17 years of experience
Chrysler 300M V6-3.5L - Other Inspections - Portland, Oregon
Prompt and very informative

Attila

19 years of experience
948 reviews
Attila
19 years of experience
Chrysler 200 V6-3.6L - Crankshaft Harmonic Balancer - Edison, New Jersey
Did exactly what was asked of him

Excellent Rating

(5,220)

Rating Summary
4,833
202
37
34
114
4,833
202
37
34
114
Number of Chrysler services completed
57420+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chrysler MECHANICS
1200+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Steering Column
Your Your steering column is part of the overall steering system, and while it may not look like much, it is critical to keeping your car on the road and moving in the direction that you want it to move....
How to Start a Car After Filling With the Wrong Fuel
Everybody Everybody makes mistakes, and putting the wrong type of gas (https://www.yourmechanic.com/article/how-to-know-what-type-of-gas-to-use-by-jason-unrau) in your car is one of those accidents that can cost a lot of money and become a huge inconvenience if not handled properly. If you put regular...
P2344 OBD-II Trouble Code: Cylinder #9 Above Knock Threshold
P2344 means an issue with the cylinder 9 knock sensor circuit. Some causes are faulty knock sensor, damaged wires, and cylinder firing malfunctions.

maintenance

Hi there. Our mobile mechanics have the tools and supplies to complete most routine maintenance services that your 2012 Honda would require. We have created a great tool that allows you to look up your vehicle's maintenance schedule (https://www.yourmechanic.com/scheduled-maintenance). Once...

Car pick up has been reduced and feels really tough acceleration

Hello, thank you for writing in. The first thing you should consider is why you had to change the belt in the first place. If it broke, slipped off, frayed, or cracked there may be an issue with one of...

Loud metallic clunk and stops cranking when trying to start after removing and reinstalling upper intake manifold,

Hi there. Check the fuel injectors and make sure that they are hooked up properly. A leaking fuel injector will cause fuel to flood the cylinder and hydro lock the piston making the engine stop cranking. Also, check for anything...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com