Chevrolet V2500 Suburban Transfer case fluid is dirty Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(15,266)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(15,266)

Transfer case fluid is dirty Inspection Service

How much does a Transfer case fluid is dirty Inspection cost?

On average, the cost for a Chevrolet V2500 Suburban Transfer case fluid is dirty Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Chevrolet V2500 SuburbanV8-7.4LService typeTransfer case fluid is dirty InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1990 Chevrolet V2500 SuburbanV8-6.2L DieselService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1989 Chevrolet V2500 SuburbanV8-6.2L DieselService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1989 Chevrolet V2500 SuburbanV8-5.7LService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1991 Chevrolet V2500 SuburbanV8-6.2L DieselService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1991 Chevrolet V2500 SuburbanV8-5.7LService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1990 Chevrolet V2500 SuburbanV8-5.7LService typeTransfer case fluid is dirty InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
Show example Chevrolet V2500 Suburban Transfer case fluid is dirty Inspection prices

A transfer case is unique to all-wheel drive and four-wheel drive vehicles, sending power from the engine to the rear wheels. The transfer case is a sealed unit and may be either gear-driven or chain-driven depending on the manufacturer. Because the transfer case is a sealed unit, it requires lubrication to keep all of the moving parts clean and at a reasonable temperature. Transfer case fluid ensures the longevity of parts in the transfer case.

How this system works:

In four-wheel drive and all-wheel drive vehicles, a transfer case is either connected directly to the back of the transmission, or by a small driveshaft further back in the vehicle. When activated, the transfer case takes power from the engine to the back wheels. Depending on the kind of vehicle, power may go to the rear wheels on a full-time or part-time basis. All-wheel drive systems are typically on all of the time while a four-wheel drive system are activated by either pressing a button in the vehicle or by manipulating a selector lever, typically located near the transmission hump on the floor. In both systems, transfer case fluid keeps the internal parts of the transfer case lubricated. Over time, transfer case fluid will become dirty and break down. When transfer case fluid breaks down you may notice shuddering from the vehicle while turning or a whining noise from the gears in the transfer case.

Common reasons for this to happen:

  • Time: Over time, transfer case fluid will break down and become dirty. Dirty transfer case fluid may cause moving parts in the transfer case to have more difficulty moving, which may cause them to fail.

  • Improper Filling: If the transfer case is not properly filled with transfer case fluid, it may break down more quickly, have difficulty dissipating heat, and keeping parts lubricated.

What to expect:

A top-rated mobile mechanic will come to your home or office and determine whether or not your transfer case fluid needs to be replaced. If it does, he or she will then provide a detailed inspection report outlining the reason the fluid needed to be replaced and the cost of any repairs that may need to be made.

How it's done:

A mechanic will first have your vehicle idle for a few minutes to warm the fluid as warm fluid will drain easier. The mechanic will then drain the old transfer case fluid through the drain plug. The drain plug on most transfer cases is magnetic and picks up metal shavings that otherwise might potentially damage components in the transfer case. The mechanic should clean the drain plug before replacing it. The mechanic will then remove the fill plug and add new fluid. The mechanic should also double-check the amount of fluid, he or she puts in the transfer case, ensuring that it was done properly. A vehicle that is under-lubricated may not dissipate heat or protect critical components as well as a vehicle that is properly lubricated. When the transfer case is full, the mechanic will replace the fill plug and check for any leaks.

How important is this service?

By choosing to not replace your transfer case fluid, you may compromise critical and expensive components inside the transfer case. Because the transfer case is a sealed unit, it is very important that the transfer fluid is filled properly so that heat is appropriately dissipated and components to not suffer from unneeded friction. Repairing a differential can be very expensive, so in order to preserve these components, you should have you transfer case fluid replaced at the correct intervals. Doing so could potentially save you a lot of money down the road.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(15,266)

Rating Summary
14,304
478
111
85
288
14,304
478
111
85
288

Charles

34 years of experience
342 reviews
Charles
34 years of experience
Chevrolet V2500 Suburban V8-5.7L - Starter - Sandy, Texas
Arrived a little bit early and finished in under an hour. Charles thoroughly test the vehicle to make sure it worked as expected. I could not have asked for more.

Irven

11 years of experience
60 reviews
Irven
11 years of experience
Chevrolet Malibu L4-2.4L - Wheel Bearings Replacement (Passenger Side Front) - Baltimore, Maryland
Irven is great and professional! He was right on time for my appointment and made my the repair in a timely manner. Would recommend!

Johnny

33 years of experience
298 reviews
Johnny
33 years of experience
Chevrolet Sonic L4-1.8L - Oil Change - Lincoln, California
Very knowledgeable and friendly-great work!!!

Pardeep

21 years of experience
1121 reviews
Pardeep
21 years of experience
Chevrolet Impala V6-3.6L - Oil/Fluid Leak - San Jose, California
Very professional and knowledgeable. Great customer service.

Excellent Rating

(15,266)

Rating Summary
14,304
478
111
85
288
14,304
478
111
85
288
Number of Chevrolet services completed
167926+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1600+
experts on our platform

Recent articles & questions

P2617 OBD-II Trouble Code: Crank Position Signal Output Circuit Open
P2617 P2617 code definition Crank Position Signal Output Circuit Open What the P2617 code means P2617 is an OBD-II generic code for the engine control module (ECM) detecting an open or short circuit in the crank position sensor signal wire...
The Truth About YourMechanic Coupons
YourMechanic.com is the only verified source of promo codes, coupon codes, discounts, and low-price offers that can save you money on car repair.
P0676 OBD-II Trouble Code: Cylinder 6 Glow Plug Circuit
P0676 means that the glow plug has failed to heat up properly and could be damaged due to a defective glow plug, module, timer, or relay.

Transmission replaced, but still slipping - 2009 Kia Borrego

There's a lot going on here. As far as the transmission concerns, your repair should be under warranty since you had the work done at the dealer. For the rest of the concerns, you may want to hire another technician...

My ignition is jammed and my key won't turn

Hi there. What you're describing is commonly associated with a broken ignition lock cylinder. The ignition lock assembly is a tumbler and key mechanism that is used to trigger power supply to auxiliary components and engage the starter motor to...

Car slowly lost power and wouldn't accelerate. Then when I pulled over and it started smoking and now it won't start.

Check the back of the engine by the firewall for any burned wires. It is possible that the harness to the engine has fallen down onto the exhaust manifold and is burning through. The wires may have shorted to the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com