Chevrolet V2500 Suburban Throttle Body Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(42)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(42)

Throttle Body Replacement Service

How much does a Throttle Body Replacement cost?

On average, the cost for a Chevrolet V2500 Suburban Throttle Body Replacement is $483 with $343 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Chevrolet V2500 SuburbanV8-5.7LService typeThrottle Body ReplacementEstimate$842.58Shop/Dealer Price$1018.08 - $1536.46
1990 Chevrolet V2500 SuburbanV8-7.4LService typeThrottle Body ReplacementEstimate$832.03Shop/Dealer Price$1005.37 - $1521.28
1990 Chevrolet V2500 SuburbanV8-6.2L DieselService typeThrottle Body ReplacementEstimate$937.41Shop/Dealer Price$1137.12 - $1732.08
1991 Chevrolet V2500 SuburbanV8-5.7LService typeThrottle Body ReplacementEstimate$842.45Shop/Dealer Price$1018.42 - $1542.16
1991 Chevrolet V2500 SuburbanV8-6.2L DieselService typeThrottle Body ReplacementEstimate$972.89Shop/Dealer Price$1182.95 - $1805.62
Show example Chevrolet V2500 Suburban Throttle Body Replacement prices

What is the throttle body and how does it work?

The throttle body is an air metering device mounted between the air filter and snorkel, and the intake plenum. Within the throttle body is a movable throttle plate whose position controls the amount of air that enters the engine to determine engine speed. Throttle body designs vary. Some incorporate an idle air control valve, throttle position sensor, and other electronic throttle controls. The throttle plate in the throttle body can be controlled directly by an accelerator pedal cable or fully electronically in the newest drive-by-wire systems.

When to consider replacing the throttle body:

  • Check engine light and/or reduced power warning light is on. Most modern throttle bodies have electrical components, such as a throttle position sensor. These components are monitored by the powertrain control module (PCM). If the check engine light or reduced power warning light comes on, a mechanic will determine if any of the stored trouble codes implicate a throttle body malfunction.
  • Wrong idle speed. Carbon deposits in the throttle body, particularly around the movable throttle plate or in the idle air control valve, can cause the engine idle speed to be too low or too high.
  • Poor transmission shifting. In some applications, transmission shift timing relies on signal outputs from the throttle body. If the throttle position sensor is defective, that might adversely affect shift timing and feel.

How do mechanics replace the throttle body?

  • The engine cover is removed, if necessary.
  • The flexible rubber snorkel from the air filter housing to the throttle body is disconnected. Typically, the connection is made with a large stainless steel hose clamp.
  • The electrical connections to the throttle body are removed.
  • If the throttle body is not a drive-by-wire system, the accelerator cable and cruise control cable are disconnected and set aside.
  • The bolts retaining the throttle body to the plenum, the gasket, and the throttle body are removed. If the throttle body is being cleaned and tested for re-use, approved chemicals are used in the cleaning process.
  • The new or serviced throttle body is re-attached to the plenum and the bolts torqued to factory specifications.
  • All cables and electrical connections are restored. The intake air snorkel is reconnected.
  • If applicable, the electronic throttle installation and idle re-learn procedures are performed using an appropriate scan tool.
  • Finally, the engine is started, brought to normal operating temperature, and idle speed is checked. The car is road tested to ensure normal operation and no illumination of warning or service lights.

Is it safe to drive with a throttle body problem?

Yes. But, the vehicle may be limited in power or put into what is referred to as limp mode, in order to get the vehicle to a repair facility. If the check engine light is on, or the electronic throttle control warning light is on, but there is no noticeable difference in engine performance, the car can be safely driven. However, it is best to have it diagnosed and repaired at your earliest convenience to avoid unexpected breakdown or possible damage to the catalytic converter.

When replacing the throttle body keep in mind:

  • Many modern throttle bodies have spring loaded sensors and plastic gears that are not intended to be manipulated directly during any diagnostics or inspections. These components are controlled electronically or generate signals. It is best to let a mechanic use approved tests to diagnose the problem.
  • Wiring faults, bad grounds, or bad terminal connections can make it appear as though an electronically controlled throttle has failed. A mechanic will always rule out all other causes before replacing the throttle body.
  • When cleaning the throttle body, special care should be taken to use only special spray cleaners designed to not damage electrical components or sensors.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(42)

Rating Summary
38
1
1
1
1
38
1
1
1
1

Charles

35 years of experience
342 reviews
Charles
35 years of experience
Chevrolet V2500 Suburban V8-5.7L - Starter - Sandy, Texas
Arrived a little bit early and finished in under an hour. Charles thoroughly test the vehicle to make sure it worked as expected. I could not have asked for more.

Chris

12 years of experience
281 reviews
Chris
12 years of experience
Chevrolet Impala V6-3.5L - Throttle Body - Phoenix, Arizona
Showed up on time and fixed my car quick

Joseph

28 years of experience
578 reviews
Joseph
28 years of experience
Chevrolet Monte Carlo V6-3.9L - Throttle Body - Houston, Texas
Excellent

Mazyar

20 years of experience
587 reviews
Mazyar
20 years of experience
Chevrolet Equinox V6-3.0L - Throttle Body - Covington, Georgia
Very clear and precise on the replacement of my alternator and suggest when I should have future service in intervals to break up the cost. Will definitely use again.

Excellent Rating

(42)

Rating Summary
38
1
1
1
1
38
1
1
1
1
Number of Chevrolet Throttle Body Replacement services completed
462+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Mercedes-Benz M-Class
The The 2012 Mercedes-Benz M-Class is a mid-size luxury SUV that combines utility and comfort to make the perfect every day vehicle. It can handle almost any terrain with its all-wheel drive model. Drivers and passengers will experience a quiet...
P0669 OBD-II Trouble Code: PCM/ECM/TCM Internal Temperature Sensor Circuit High
P0669 means that the TCM has detected a malfunction in the internal temperature sensor circuit due to a faulty control module or shorted wiring.
P3459 OBD-II Trouble Code: TP, MAP, or MAF Sensors
P3459 means the system has detected a problem with the vehicles TP, MAP, or MAF sensors due to defective cylinders, low oil pressure, or an oil block.

Loud metallic clicking noise from engine

Hi there. If there is a grinding noise when trying to crank the engine then most of the time it is caused by the starter failing (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-starter). If the starter gear is not engaging correctly then this will occur. It...

Engine idle fluctuates and dies.

Hi There! It sounds like you may have a dirty or failing idle air control valve causing your engine idle to fluctuate and eventually stall. In the mornings it is normal for the engine idle to be a bit higher...

SECOND OPINION Customer: Truck displayed. Service Advance Track, truck would not start, replaced battery, still displays Servive Advance Trac, truck will not start, can you helpJA: Have you checked the battery, particularly the terminal connections? Are they corroded?Customer: Yes they are in good shapeJA: What is the make/model/year of your car?Customer: 2014 Ford 150 truckJA: Are you fixing your vehicle yourself? What have you tried so far?Customer: When it first displayed Service Advance Trac And would not start thought it was the battery,someone tried to give me a jump,didn't work, had a battery test the test showed the battery was bad, replaced the battery, displays the same and won't startJA: Anything else you want the Mechanic to know before I connect you?Customer: No

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com