Chevrolet Uplander Transfer case fluid is dirty Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(89)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(89)

Transfer case fluid is dirty Inspection Service

How much does a Transfer case fluid is dirty Inspection cost?

On average, the cost for a Chevrolet Uplander Transfer case fluid is dirty Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2009 Chevrolet UplanderV6-3.9LService typeTransfer case fluid is dirty InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2006 Chevrolet UplanderV6-3.9LService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2006 Chevrolet UplanderV6-3.5LService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2008 Chevrolet UplanderV6-3.9LService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2005 Chevrolet UplanderV6-3.5LService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2007 Chevrolet UplanderV6-3.9LService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
Show example Chevrolet Uplander Transfer case fluid is dirty Inspection prices

A transfer case is unique to all-wheel drive and four-wheel drive vehicles, sending power from the engine to the rear wheels. The transfer case is a sealed unit and may be either gear-driven or chain-driven depending on the manufacturer. Because the transfer case is a sealed unit, it requires lubrication to keep all of the moving parts clean and at a reasonable temperature. Transfer case fluid ensures the longevity of parts in the transfer case.

How this system works:

In four-wheel drive and all-wheel drive vehicles, a transfer case is either connected directly to the back of the transmission, or by a small driveshaft further back in the vehicle. When activated, the transfer case takes power from the engine to the back wheels. Depending on the kind of vehicle, power may go to the rear wheels on a full-time or part-time basis. All-wheel drive systems are typically on all of the time while a four-wheel drive system are activated by either pressing a button in the vehicle or by manipulating a selector lever, typically located near the transmission hump on the floor. In both systems, transfer case fluid keeps the internal parts of the transfer case lubricated. Over time, transfer case fluid will become dirty and break down. When transfer case fluid breaks down you may notice shuddering from the vehicle while turning or a whining noise from the gears in the transfer case.

Common reasons for this to happen:

  • Time: Over time, transfer case fluid will break down and become dirty. Dirty transfer case fluid may cause moving parts in the transfer case to have more difficulty moving, which may cause them to fail.

  • Improper Filling: If the transfer case is not properly filled with transfer case fluid, it may break down more quickly, have difficulty dissipating heat, and keeping parts lubricated.

What to expect:

A top-rated mobile mechanic will come to your home or office and determine whether or not your transfer case fluid needs to be replaced. If it does, he or she will then provide a detailed inspection report outlining the reason the fluid needed to be replaced and the cost of any repairs that may need to be made.

How it's done:

A mechanic will first have your vehicle idle for a few minutes to warm the fluid as warm fluid will drain easier. The mechanic will then drain the old transfer case fluid through the drain plug. The drain plug on most transfer cases is magnetic and picks up metal shavings that otherwise might potentially damage components in the transfer case. The mechanic should clean the drain plug before replacing it. The mechanic will then remove the fill plug and add new fluid. The mechanic should also double-check the amount of fluid, he or she puts in the transfer case, ensuring that it was done properly. A vehicle that is under-lubricated may not dissipate heat or protect critical components as well as a vehicle that is properly lubricated. When the transfer case is full, the mechanic will replace the fill plug and check for any leaks.

How important is this service?

By choosing to not replace your transfer case fluid, you may compromise critical and expensive components inside the transfer case. Because the transfer case is a sealed unit, it is very important that the transfer fluid is filled properly so that heat is appropriately dissipated and components to not suffer from unneeded friction. Repairing a differential can be very expensive, so in order to preserve these components, you should have you transfer case fluid replaced at the correct intervals. Doing so could potentially save you a lot of money down the road.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(89)

Rating Summary
85
2
0
0
2
85
2
0
0
2

Fred

17 years of experience
389 reviews
Fred
17 years of experience
Chevrolet Uplander V6-3.5L - Wheel Hub Assembly Replacement (Driver Side Front) - Spring, Texas
Very professional, on time, and completed work quickly.

Kevin

33 years of experience
234 reviews
Kevin
33 years of experience
Chevrolet Uplander V6-3.9L - HopSkipDrive Inspection - Torrance, California
I like the yourmechanic concept. I will definetly consider it for future vehicle maintenance.

Jennifer

19 years of experience
71 reviews
Jennifer
19 years of experience
Chevrolet Uplander V6-3.9L - Engine or Transmission Mount Replacement - Las Vegas, Nevada
Excellent work. !!!!

Richard

16 years of experience
77 reviews
Richard
16 years of experience
Chevrolet Uplander V6-3.5L - Loud noises when car is put in gear - Murrieta, California
Richard came right on time. He was very patient and knowledgeable, listening to all my concerns and showing me all the various problems he found. I booked him for just an inspection, and it was very thorough and broken down into priority levels, which is exactly what I needed and wanted. Definitely recommend him!

Excellent Rating

(89)

Rating Summary
85
2
0
0
2
85
2
0
0
2
Number of Chevrolet Uplander services completed
979+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1600+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Console Light Bulb
If your car's center console light is dim, flickering, or not working at all, you may need to replace the console light bulb.
P0478 OBD-II Trouble Code: Exhaust Pressure Control Valve High
P0478 code means that there is an abnormally high voltage reading often due to the exhaust system back pressure control valve circuit.
How to Replace a Clutch Cable Adjuster
The clutch cable adjuster wears out as the clutch cable does. A common sign of a damaged cable adjuster is a grinding sound when moving the shifter.

Fuel rail injection pressure sensor

Hey there, thanks for writing in. It is in the top center of the motor on the fuel rail. You have to remove the upper intake manifold to get to it.

BMW 2010 x3 fuel filter

Poor mileage has many very common causes other than dirty fuel injectors. However, if a diagnostic (that is, actual tests) suggests that fuel injectors are dirty the only way they can be cleaned is by removing them from the engine...

The left side of my car has no power. driver's door and passenger door wont open.

It sounds like you may have some pinched wires or an electrical problem (https://www.yourmechanic.com/services/electrical-components-are-not-working-inspection) with the wiring running through the doors to the drive's side of the vehicle. As you may know, there are wires that run through the doors...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com