Chevrolet Silverado 1500 HD Throttle Body Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(12)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(12)

Throttle Body Replacement Service

How much does a Throttle Body Replacement cost?

On average, the cost for a Chevrolet Silverado 1500 HD Throttle Body Replacement is $616 with $420 for parts and $196 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2002 Chevrolet Silverado 1500 HDV8-6.0LService typeThrottle Body ReplacementEstimate$1787.16Shop/Dealer Price$2184.74 - $3366.14
2005 Chevrolet Silverado 1500 HDV8-6.0LService typeThrottle Body ReplacementEstimate$1044.01Shop/Dealer Price$1256.48 - $1888.12
2001 Chevrolet Silverado 1500 HDV8-6.0LService typeThrottle Body ReplacementEstimate$1774.55Shop/Dealer Price$2169.69 - $3349.26
2006 Chevrolet Silverado 1500 HDV8-6.0LService typeThrottle Body ReplacementEstimate$1044.01Shop/Dealer Price$1256.51 - $1888.18
2003 Chevrolet Silverado 1500 HDV8-6.0LService typeThrottle Body ReplacementEstimate$1044.01Shop/Dealer Price$1258.57 - $1891.79
Show example Chevrolet Silverado 1500 HD Throttle Body Replacement prices

What is the throttle body and how does it work?

The throttle body is an air metering device mounted between the air filter and snorkel, and the intake plenum. Within the throttle body is a movable throttle plate whose position controls the amount of air that enters the engine to determine engine speed. Throttle body designs vary. Some incorporate an idle air control valve, throttle position sensor, and other electronic throttle controls. The throttle plate in the throttle body can be controlled directly by an accelerator pedal cable or fully electronically in the newest drive-by-wire systems.

When to consider replacing the throttle body:

  • Check engine light and/or reduced power warning light is on. Most modern throttle bodies have electrical components, such as a throttle position sensor. These components are monitored by the powertrain control module (PCM). If the check engine light or reduced power warning light comes on, a mechanic will determine if any of the stored trouble codes implicate a throttle body malfunction.
  • Wrong idle speed. Carbon deposits in the throttle body, particularly around the movable throttle plate or in the idle air control valve, can cause the engine idle speed to be too low or too high.
  • Poor transmission shifting. In some applications, transmission shift timing relies on signal outputs from the throttle body. If the throttle position sensor is defective, that might adversely affect shift timing and feel.

How do mechanics replace the throttle body?

  • The engine cover is removed, if necessary.
  • The flexible rubber snorkel from the air filter housing to the throttle body is disconnected. Typically, the connection is made with a large stainless steel hose clamp.
  • The electrical connections to the throttle body are removed.
  • If the throttle body is not a drive-by-wire system, the accelerator cable and cruise control cable are disconnected and set aside.
  • The bolts retaining the throttle body to the plenum, the gasket, and the throttle body are removed. If the throttle body is being cleaned and tested for re-use, approved chemicals are used in the cleaning process.
  • The new or serviced throttle body is re-attached to the plenum and the bolts torqued to factory specifications.
  • All cables and electrical connections are restored. The intake air snorkel is reconnected.
  • If applicable, the electronic throttle installation and idle re-learn procedures are performed using an appropriate scan tool.
  • Finally, the engine is started, brought to normal operating temperature, and idle speed is checked. The car is road tested to ensure normal operation and no illumination of warning or service lights.

Is it safe to drive with a throttle body problem?

Yes. But, the vehicle may be limited in power or put into what is referred to as limp mode, in order to get the vehicle to a repair facility. If the check engine light is on, or the electronic throttle control warning light is on, but there is no noticeable difference in engine performance, the car can be safely driven. However, it is best to have it diagnosed and repaired at your earliest convenience to avoid unexpected breakdown or possible damage to the catalytic converter.

When replacing the throttle body keep in mind:

  • Many modern throttle bodies have spring loaded sensors and plastic gears that are not intended to be manipulated directly during any diagnostics or inspections. These components are controlled electronically or generate signals. It is best to let a mechanic use approved tests to diagnose the problem.
  • Wiring faults, bad grounds, or bad terminal connections can make it appear as though an electronically controlled throttle has failed. A mechanic will always rule out all other causes before replacing the throttle body.
  • When cleaning the throttle body, special care should be taken to use only special spray cleaners designed to not damage electrical components or sensors.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(12)

Rating Summary
11
0
0
0
1
11
0
0
0
1

Eric

15 years of experience
73 reviews
Eric
15 years of experience
Chevrolet Silverado 1500 HD V8-6.0L - Water Pump - Fayetteville, Georgia
Eric arrived early and was fantastic. He completed the job quickly and was friendly and very knowledgeable.

Victor

36 years of experience
230 reviews
Victor
36 years of experience
Chevrolet Silverado 1500 HD V8-6.0L - Coolant is leaking - Albuquerque, New Mexico
Very good

Jay

38 years of experience
1035 reviews
Jay
38 years of experience
Chevrolet Silverado 1500 HD V8-6.0L - Starter - Corona, California
Jay is always very knowledgeable and professional. We are pleased when we see it is Jay who will be servicing our vehicles through Your Mechanic. Thank you Jay!

Nicholas

12 years of experience
303 reviews
Nicholas
12 years of experience
Chevrolet Silverado 1500 HD V8-6.0L - Coolant is leaking - Conroe, Texas
Great service. Always on time

Excellent Rating

(12)

Rating Summary
11
0
0
0
1
11
0
0
0
1
Number of Chevrolet Silverado 1500 HD services completed
132+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

P2710 OBD-II Trouble Code: Shift Solenoid F Interm
P2710 means a problem in a shift solenoid has been detected due to a failing transmission and/or transmission components or an electrical issue.
A Buyer's Guide to the 2012 Mazda CX-7
If If you want an SUV, but don’t care as much about the “utility” part as you do the “sport” features, you should take a look at what the 2012 Mazda CX-7 has to offer. Key Features With a turbo...
Windshield Laws in Hawaii
Driving Driving on the roads in Hawaii requires that you know the traffic laws that you have to follow. However, in addition to the rules of the road, you also have to make sure your windshield meets the requirements of...

How do you use the automatic dimming rearview mirror?

If your car is equipped with an automatic dimming rearview mirror, you have a handy solution for beating glare from behind you. Here’s how the mirror works: Turn the key to ON. Turn the mirror on. Once activated, the mirror...

How I change the engine switch position with the key?

The engine switch has four positions: Off, ACC, On, and Start. When you insert the key, the switch will automatically be in the Off position. Rotate the key clockwise one position to reach the ACC position, where some electrical components...

Wheel locked, brake pedal wont go down, shift wont move and ignition wont turn?

Hello. You are likely experiencing an engine failure of some type. Do not let this scare you at first. All of these systems that are failing depend on the engine functioning correctly in order to do their job. Without vacuum...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com