Chevrolet S10 Blazer Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(19)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(19)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a Chevrolet S10 Blazer Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1987 Chevrolet S10 BlazerV6-2.8LService typeWindows InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1989 Chevrolet S10 BlazerV6-4.3LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1988 Chevrolet S10 BlazerV6-4.3LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1984 Chevrolet S10 BlazerL4-1.9LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1991 Chevrolet S10 BlazerV6-4.3LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1994 Chevrolet S10 BlazerV6-4.3LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1983 Chevrolet S10 BlazerL4-2.0LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1985 Chevrolet S10 BlazerL4-2.5LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Chevrolet S10 Blazer Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(19)

Rating Summary
14
2
1
0
2
14
2
1
0
2

Graham

17 years of experience
137 reviews
Graham
17 years of experience
Chevrolet S10 Blazer V6-4.3L - Car starts and then dies - Bloomingdale, Illinois
I will book him again he's super professional and he knows what he's talking about really honest man

Edgar

25 years of experience
41 reviews
Edgar
25 years of experience
Chevrolet S10 Blazer V6-4.3L - Check Engine Light is on - Redwood City, California

Nathan

17 years of experience
282 reviews
Nathan
17 years of experience
Chevrolet S10 Blazer V6-4.3L - Intake Manifold Gaskets - Austin, Texas
Great guy! Professional, only recommended services necessary. Took the time to diagnose and do the job right. I will recommend and book Nathan again.

Lucas

21 years of experience
887 reviews
Lucas
21 years of experience
Chevrolet S10 Blazer V6-4.3L - Car is shaking or vibrating - West Hills, California
Great resource. Informative and honest !!

Excellent Rating

(19)

Rating Summary
14
2
1
0
2
14
2
1
0
2
Number of Chevrolet S10 Blazer services completed
209+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1600+
experts on our platform

Recent articles & questions

A Buyer's Guide to the 2012 Buick Regal eAssist
Although Although a lot changed about the Buick Regal in 2012, the addition of a hybrid model was definitely the biggest head turner. Whether you want to do your part for the environment or simply save at the pump, this...
How Long Does an Emergency Brake Control Last?
No No matter what vehicle you drive, it is equipped with an emergency parking brake. While some people use this each and every day, others never end up using it. It is meant to stop your car from rolling if...
How to Report a Vehicle Break-In
Having Having someone go through the contents of your car and take your personal belongings is a huge violation of your privacy. The act of breaking into a home or vehicle with the intent to commit a crime or theft...

Knocking sound when turning. Possibly suspension.

It could be a tie rod end that is worn out. A technician could tell you exactly where the problem is coming from if you schedule an inspection of the clicking noise when you turn (https://www.yourmechanic.com/services/loud-clicking-noise-when-i-turn-the-car-inspection).

Can you do a front end alignment? 2005 Chrysler Sebring

Hi there - it sounds like you have damaged a tire or the wheel itself, and perhaps bent one of the suspension links (https://www.yourmechanic.com/question/my-car-wheel-won-t-straighten-by-david) with this impact. I would recommend a suspension inspection (https://www.yourmechanic.com/services/brakes-steering-and-suspension-inspection) by a mobile, professional mechanic, such...

I turn the key and nothing happens

Be sure any engine immobilizer system (security system) is not activated, thus preventing the car from starting. The battery should be load tested by a professional. Load testing can only be reliably performed on a fully charged battery. If the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com