Chevrolet Monte Carlo Hazard / Turn Signal Flasher Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(3)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(3)

Hazard / Turn Signal Flasher Replacement Service

How much does a Hazard / Turn Signal Flasher Replacement cost?

On average, the cost for a Chevrolet Monte Carlo Hazard / Turn Signal Flasher Replacement is $124 with $29 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1996 Chevrolet Monte CarloV6-3.4LService typeHazard / Turn Signal Flasher ReplacementEstimate$321.63Shop/Dealer Price$383.29 - $545.77
1981 Chevrolet Monte CarloV6-3.8LService typeHazard / Turn Signal Flasher ReplacementEstimate$352.19Shop/Dealer Price$426.51 - $626.92
1980 Chevrolet Monte CarloV6-3.8LService typeHazard / Turn Signal Flasher ReplacementEstimate$352.19Shop/Dealer Price$426.51 - $626.92
1985 Chevrolet Monte CarloV6-4.3LService typeHazard / Turn Signal Flasher ReplacementEstimate$152.13Shop/Dealer Price$176.41 - $226.76
1973 Chevrolet Monte CarloV8-7.4LService typeHazard / Turn Signal Flasher ReplacementEstimate$301.63Shop/Dealer Price$363.32 - $525.83
2002 Chevrolet Monte CarloV6-3.4LService typeHazard / Turn Signal Flasher ReplacementEstimate$225.29Shop/Dealer Price$267.88 - $373.12
1974 Chevrolet Monte CarloV8-5.7LService typeHazard / Turn Signal Flasher ReplacementEstimate$368.71Shop/Dealer Price$445.77 - $654.72
2003 Chevrolet Monte CarloV6-3.4LService typeHazard / Turn Signal Flasher ReplacementEstimate$230.29Shop/Dealer Price$273.12 - $378.54
Show example Chevrolet Monte Carlo Hazard / Turn Signal Flasher Replacement prices

What is the Hazard / Turn Signal Flasher all about?

The hazard / turn signal flasher is a small, electrical device that causes the lights on your vehicle to flash in a rhythmic, steady fashion. It is usually located under the driver’s side of the dash, and is wired in-line with the turn signal lever and hazard switch buttons. When the turn signals or hazard lights are turned on, the circuit’s power is routed through the flasher, which only emits short bursts of power that cause the lights to flash. If the flasher is not working, your hazard or turn signal lights may stay on solid when turned on, not turn on at all, or flash at an undesirable rate.

Keep in mind:

  • Flasher units hardly ever develop problems. Although in older vehicles, the wiring can become compromised.
  • Don’t assume that the problem is with the flasher – it could be something as simple as a blown fuse.
  • Check your bulbs, and replace them if necessary.

How it's done:

  • The vehicle's hood is opened and supported manually
  • The new relays are installed onto a mounting bracket
  • The wiring is connected to the relays and into the vehicle harness
  • The hood manual support is removed
  • The install is verified and the hazard lights are tested for proper operation

Our recommendation:

If your turn signals aren’t working, you will fail a motor vehicle inspection or a roadside check. Examine your fuses to make sure none are discolored – this indicates a blown fuse that could be causing the problem. Check your light bulbs as well. If all are in good working order, then the problem could be the hazard / turn signal flasher, which is part of your car's electrical system. Have one of our expert mechanics inspect and replace the hazard turn signal flasher if required.

What common symptoms indicate you may need to replace the Hazard / Turn Signal Flasher?

  • No turn signals on either side
  • Turn signal on only one side
  • Turn signals light up but don’t flash
  • Turn signal flashes too slow
  • Turn signal flashes too fast
  • Hazard lights don’t work

How important is this service?

Malfunctioning turn signals and hazard lights are critical safety issues. If your turn signals aren’t working, you have no way of communicating your driving intentions to other drivers aside from hand signals. Have one of our expert mechanics check them immediately so that the problem can be diagnosed, and appropriate measures taken, such as replacing your hazard / turn signal flasher.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(3)

Rating Summary
3
0
0
0
0
3
0
0
0
0

Michael

20 years of experience
391 reviews
Michael
20 years of experience
Monte Carlo 2002 - Hazard / Turn Signal Flasher - Mesa, AZ
Michael showed ahead of schedule and completed the job in an hour Was professional and knew what he was doing Would definitely recommend him

Marko

5 years of experience
21 reviews
Marko
5 years of experience
Monte Carlo 1999 - Brake Pads - San Diego, CA
Professional, Friendly, Honest, knowledgeable. Greatly appreciate his advice and the job he did.

Adam

16 years of experience
142 reviews
Adam
16 years of experience
Monte Carlo 2004 - Power Steering Pump - Boynton Beach, FL
Amazing service, really cares about his work!

Leo

17 years of experience
80 reviews
Leo
17 years of experience
Monte Carlo 2007 - Car is not starting - Greensboro, NC
He did an checked everything possible he was a really good guy did his best even checked the cam.

Excellent Rating

(3)

Rating Summary
3
0
0
0
0
3
0
0
0
0
Number of Chevrolet Monte Carlo Hazard / Turn Signal Flasher Replacement services completed
33+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1600+
experts on our platform

Recent articles & questions

How to Buy Good Quality Windows
High High quality windows on your vehicle not only make visibility better, but they provide a safety factor. Today’s modern vehicles all feature glass that is strong and breaks differently than typical glass. For the sake of this story, we’ll...
How to Replace a Clutch Slave Cylinder
Clutch slave cylinders need to be replaced if brake fluid leaks. If gears grind or the clutch won’t, the clutch pedal may be at fault.
P0315 OBD-II Trouble Code: Crankshaft Position System Variation Not Learned
Trouble code P0315 means the crankshaft position system has a fault, often caused by faulty wiring or corroded sensor connector.

EPC keeping car from starting

The EPC light is indicating a fault in the electronic throttle control system. The best way to narrow down the issue is to read out the fault codes in the engine management system; there could be issues with the throttle...

2003 Ford Expedition Eddie Bauer 5.4 L 4 WD ..... Heat not working in front but is in back. Blend door Actuator?

That is a possibility but there are separate heater cores (front versus rear) and so in your application there may also be separate heater control valves (in line "plumbing") for the front heater core versus the rear heater core. If...

My car won’t start. There is a red flashing light, car with key symbol. No noise is made when I turn key. Just had it checked

You should not have two programmed keys on the same keychain. If that does not work then you have a problem with the anti-theft system or the key programming. The system can only be programmed using the factory level scanner....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com