logo

Chevrolet Lumina Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(84)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

(84)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Chevrolet Lumina Control Arm Assembly Replacement is $210 with $70 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1996 Chevrolet LuminaV6-3.4LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$294.36Shop/Dealer Price$332.80 - $440.02
1997 Chevrolet LuminaV6-3.4LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$285.35Shop/Dealer Price$322.02 - $427.92
1990 Chevrolet LuminaL4-2.5LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$727.27Shop/Dealer Price$874.45 - $1311.80
1991 Chevrolet LuminaL4-2.5LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$727.27Shop/Dealer Price$874.45 - $1311.80
1990 Chevrolet LuminaV6-3.1LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$727.27Shop/Dealer Price$875.92 - $1314.38
1991 Chevrolet LuminaV6-3.4LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$727.27Shop/Dealer Price$874.59 - $1312.05
1995 Chevrolet LuminaV6-3.1LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$285.35Shop/Dealer Price$322.06 - $427.99
1995 Chevrolet LuminaV6-3.1LService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$741.87Shop/Dealer Price$889.23 - $1326.72
Show example Chevrolet Lumina Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Number of Chevrolet Lumina services completed
924+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(84)
Rating Summary
80
1
1
0
2
80
1
1
0
2

Michael

28 years of experience
672 reviews
Request Michael
Michael
28 years of experience
Request Michael
by Eugene
Chevrolet Lumina V6-3.1L - Fuel Pump - San Tan Valley, Arizona
Good job... Satisfied

Jason

24 years of experience
190 reviews
Request Jason
Jason
24 years of experience
Request Jason
by Jonathan
Chevrolet Lumina V6-3.1L - Coolant is leaking - Nashville, Tennessee
Friendly and knowledgeable

Mack

23 years of experience
114 reviews
Request Mack
Mack
23 years of experience
Request Mack
by Sequoyah
Chevrolet Lumina V6-3.1L - Crankshaft Harmonic Balancer - Arlington, Texas
Mack was positively amazing. I described the issue, what I'd tried, and what had led me to call him out, and he laughed good-naturedly and told me that I'd done the right thing. He explained why I'd had the trouble I did, then went right to work. He even let me watch him work, which was a big help to me since it gave me an opportunity to see how it was done. When the job was done, Mack ran a diagnostic on my car and even pointed out some areas I might have issues with in the future, which is a great help since I'm no car buff. Overall, he got the job done in half the time I'd have been able to do it in, and was extremely helpful in just giving me information about my car that will come in handy. I'm always going to call Mack when I need work done.

Edward

43 years of experience
64 reviews
Request Edward
Edward
43 years of experience
Request Edward
by Robert
Chevrolet Lumina V6-3.1L - Serpentine/Drive Belt - Avondale, Arizona

Excellent Rating

(84)
Rating Summary
80
1
1
0
2
80
1
1
0
2
Number of Chevrolet Lumina services completed
924+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Recent articles & questions

Massachusetts Speed Limits, Laws, and Fines
Following Following is an overview of the laws, limits, and fines as they relate to speeding traffic violations in the state of Massachusetts. Speed limits in Massachusetts 65 mph: most freeways and interstates outside of central business districts 55 mph:...
Read more
How to Get Smog Technician Certified in New Jersey
Automotive technician jobs include smog certified emissions inspectors. In New Jersey, there are thirteen approved inspector training providers.
Read more
How Long Do Brake Pads Last?
How How long can brake pads last? Brake pads last from 25,000 miles to 70,000 miles depending on their design and material. Brake pads are part of the braking system of every vehicle. Designed to handle high friction, when the...
Read more

jerking while driving

Hi there. This jerking can occur for a number of reasons. I would first start by checking to see if the check engine light is coming on. If it is then I would scan the computer for codes. Any codes...
Read more

location of CKP sens 1997 Nissan 4 cyl pickup

The crankshaft position sensor is on the left rear of engine
Read more

I was in an accident where I rear ended someone and the body damage has been fixed but now my engine oil sensor is broken and my heat for the driver side isn't working, can that from an accident?

Read more
  1. Home
  2. Estimates
  3. Chevrolet
  4. Lumina
  5. Control Arm Assembly Replacement

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com

Read FAQ
GET A QUOTE