Chevrolet LCF 3500HD Oil level is low Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(15,266)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(15,266)

Oil level is low Inspection Service

How much does a Oil level is low Inspection cost?

On average, the cost for a Chevrolet LCF 3500HD Oil level is low Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2016 Chevrolet LCF 3500HDL4-3.0L Turbo DieselService typeOil level is low InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2017 Chevrolet LCF 3500HDL4-3.0L Turbo DieselService typeOil level is low InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
Show example Chevrolet LCF 3500HD Oil level is low Inspection prices

A vehicle needs oil to run and without it, or too little of it, severe damage can happen to the engine. Engine oil lubricates all of the major moving parts of the engine, which cuts down on wear and tear and dissipates the heat the engine generates. Not having enough oil in a vehicle can be deadly to the car’s engine.

Engine oil operates in a closed loop system so if the engine is losing oil at a significant rate, there is a problem somewhere, most likely a leak.

How this system works:

Engine oil is stored in the oil pan, which holds 4 to 6 quarts of oil depending on the vehicle. When the vehicle engine is started, the oil pump sucks oil from the oil pan through a part called the pickup tube. The oil is then pumped into the oil filter, which removes the dirt and debris that has accumulated in the oil. The engine oil then circulates throughout the engine via spurt holes before heading back to the oil pan where the process starts all over again.

Common reasons for this to happen:

  • Oil Light Comes On: The Low Oil Engine Warning light will illuminate when the oil level gets lower than it should in the oil pan. This warning light varies on vehicles but in most it looks like an oilcan with a droplet coming out of the spout. If this light illuminates for more than a couple of seconds at start-up the car should be inspected immediately as the oil level is too low in the car. This can lead to damage to critical engine components and expensive repairs.

  • Oil Leak: An oil leak can occur in just about any of the oil system components. Common problems are leaking or failing oil pan gaskets. As gaskets and seals age they tend to shrink and fail letting oil escape the system. A leaking gasket can quickly turn into an expensive repair if not addressed, as critical components will not have the lubrication they need to operate safely.

  • Worn Piston Rings: Piston rings help control the oil pressure in the vehicle. If they are worn or damaged the oil levels in the car will drop. Look for white or gray exhaust smoke, slow acceleration and excessive oil consumption. This problem can quickly damage critical and expensive engine components such as the pistons themselves and should be repaired quickly.

  • Faulty Worn Valve Guides: Valve guides are a cylindrical piece of metal that is pressed or cast into the cylinder head. They help to conduct heat away from the combustion process and into the cylinder head where it may be taken up by the cooling system. If valve guide seals are worn, cracked or broken the engine will suck oil down the guides and dump it into the cylinder, which will pull oil from the lubrication system. Oil levels will drop. This problem should be addressed as soon as possible.

  • Incorrect Oil Type: Engines can be filled with low viscosity synthetic oil, which reduces friction and increase fuel efficiency. A lower viscosity oil is thinner and can leak past rings and the seals on valve guides resulting in a loss of oil. Synthetic oil should not be used for the engine break-in period.

  • Assembly Mistakes: Piston rings that are not seated or sealed properly can cause oil to leak out of the engine. This problem can result in significant oil loss. The engine must be rebuilt to correct this problem.

What to expect:

Oil will become black and a bit gritty over time, this is normal and does not indicate that the oil needs to be changed. Most modern oils, especially the synthetics can last between 7,000 and 10,000 miles before they need to be changed.

How it's done:

A mechanic will inspect your car for oil leaks, the oil type and check to see if the oil level warning light is operating as it should. The mechanic will also inspect some related engine components. This will include valve guides, piston rings and more.

How important is this service?

Loss of engine oil is almost always a sign of a more serious problem. Engine oil is literally the lifeblood of the car and if the levels get too low it can damage critical components of the engine. Oil loss or high oil consumption should be investigated as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(15,266)

Rating Summary
14,304
478
111
85
288
14,304
478
111
85
288

Larry

19 years of experience
116 reviews
Larry
19 years of experience
Chevrolet G20 V8-5.7L - Adjust Ignition Timing - Oakland, California
Very knowledgeable & informative great worker

John

20 years of experience
590 reviews
John
20 years of experience
Chevrolet HHR L4-2.2L - Wheel Hub Assembly Replacement (Driver Side Front) - Orlando, Florida
Very helpful and knowable... will use again.

James

41 years of experience
112 reviews
James
41 years of experience
Chevrolet Equinox L4-2.4L - Brake Rotor/Disc Replacement (Front) - Cleveland, Ohio
Very friendly and funny mechanic. He took his time explaining to me what I need done in the future for my car. I totally recommend him and will use him again in the future. God bless you!

Jay

37 years of experience
968 reviews
Jay
37 years of experience
Chevrolet Monte Carlo V6-3.8L - Repair vacuum leaks at manifold PVC and vacuum line - Moreno Valley, California
Jay's awesome.. Courteous and professional. Knows his stuff. Would recommend him to anyone

Excellent Rating

(15,266)

Rating Summary
14,304
478
111
85
288
14,304
478
111
85
288
Number of Chevrolet services completed
167926+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1600+
experts on our platform

Recent articles & questions

5 Essential Things to Know Before Buying a Truck
Trucks Trucks are a popular option thanks to their overall versatility. They can haul people and things with ease, and they handle off-road adventures like champs. However, there are five essential things to know before buying a truck. Passengers The...
How to Replace a Lost or Stolen Car Title in Massachusetts
As As a vehicle owner you have a title that proves the vehicle is yours and you are the registered owner. Over time it's not unheard of for this title to get lost, damaged, or even stolen. This can be...
How to Replace a Transmission Position Sensor (Switch)
Transmission position sensors (TPS) switch ensures a car is in Neutral or Park when started and shuts the car down if it's not in the right gear.

Check Engine light on with specific codes.

I would like to start off by saying that the numbers you gave only contain two trouble codes, which are Codes P0405 and P0455. The 01/02 is code 1 of 2 and 02/02 is code 2 of 2. The KWP...

How do I select a radio station?

There are two ways to tune your radio to a specific station: Press and hold down the fast-forward or rewind button. Doing so will stream through all of the radio stations; when you get to the station you would like...

gears not shifting in drive, only works in reverse and park, ABS and traction control ights are on

Many different things can cause the transmission to not be able to change gears. The most likely would be a transmission linkage problem, a shift solenoid, a bad position sensor, or a failing transmission. A qualified technician, such as one...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com