Chevrolet LCF 3500 Camshaft Position Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(92)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(92)

Camshaft Position Sensor Replacement Service

How much does a Camshaft Position Sensor Replacement cost?

On average, the cost for a Chevrolet LCF 3500 Camshaft Position Sensor Replacement is $212 with $72 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2016 Chevrolet LCF 3500V8-6.0LService typeCamshaft Position Sensor ReplacementEstimate$298.76Shop/Dealer Price$338.30 - $448.82
Show example Chevrolet LCF 3500 Camshaft Position Sensor Replacement prices

What is the Camshaft Position Sensor all about?

The camshaft position sensor monitors the position of the camshaft and reports that data to the car’s onboard computer system. This computer system works with sensors and other devices to keep the engine running. With data from the camshaft position sensor (CPS), the fuel injectors know when to fire.

When the sensor malfunctions, the computer does not know when to fire the injectors and may not fire them at all. The faulty readouts may also throw off spark timing, which will affect the car’s fuel economy. This sensor is used in conjunction with the crankshaft position sensor to control ignition timing. It is common for heat and oil leaks to cause this sensor to fail, due to where the sensor is located.

Keep in mind:

  • Damage to the camshaft position sensor is often caused by oil leaks; if this is the case, you may need another part of your car replaced or repaired.
  • When the camshaft position sensor is replaced, the alignment of the timing belt should be monitored so that no fluids leak onto the position sensor mounting area.
  • Some camshaft position sensors will need to have their software updated when they are installed.
  • Timing belts, mass air flow sensors, and crankshaft position sensors can all trigger the trouble code for the camshaft position sensor.

How it's done:

  • Scan test computer for trouble codes.
  • Pinpoint tests as per flow charts.
  • Remove and replace Crankshaft Position Sensor.
  • Clear trouble codes.
  • Check for proper operation and test drive car.

Our recommendation:

The camshaft position sensor isn’t checked in most regular services, but your vehicle has warning signs for when the sensor begins to fail. Because it sends information to the camshaft, when the sensor begins to fail your engine will begin to have trouble. Your engine may have a hard time turning on, staying on, idling, or running smoothly. Your Check Engine warning light should illuminate as well.

What common symptoms indicate you may need to replace the Camshaft Position Sensor?

  • Car stalls or does not start.
  • Car struggles to accelerate (does not maintain speed).
  • Check Engine light is on.
  • Car misfires.
  • Car stumbles or sputters on startup.
  • Car runs poorly or runs rough.

How important is this service?

The camshaft position sensor provides valuable information about the camshaft position to the computer management system. The computer system uses the information from the position sensor to determine when to inject more fuel. Without the sensor’s information, the computer won’t inject fuel properly, and your vehicle will stall or sputter.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(92)

Rating Summary
85
1
0
1
5
85
1
0
1
5

Maxwell

19 years of experience
390 reviews
Maxwell
19 years of experience
Chevrolet Malibu L4-2.4L - Camshaft Position Sensor - Conroe, Texas
He was awesome

Justin

21 years of experience
70 reviews
Justin
21 years of experience
Chevrolet Avalanche 1500 V8-5.3L - Camshaft Position Sensor - Converse, Texas
Justin showed up a little early for the appointment, and got to work right away. He was more than willing to give me a proper explanation of what he was doing and what the problem was. Incredibly courteous and very professional. I would certainly recommend him to anyone that needs work done.

Joel

12 years of experience
177 reviews
Joel
12 years of experience
Chevrolet Camaro V6-3.6L - Camshaft Position Sensor - Little Elm, Texas
Very knowledgeable and thorough. An excellent service provider. I would request him again and would recommend him to others.

Dan

40 years of experience
1080 reviews
Dan
40 years of experience
Chevrolet Cobalt L4-2.2L - Camshaft Position Sensor - Norcross, Georgia
On time let me know everything he done to my car and why it didn’t start very professional

Excellent Rating

(92)

Rating Summary
85
1
0
1
5
85
1
0
1
5
Number of Chevrolet Camshaft Position Sensor Replacement services completed
1012+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Brake Booster Vacuum Sensor
A failing brake booster vacuum sensor will cause the brake pedal to be stiff or turn on the Check Engine Light.
How Long Does an Injector Control Pressure Sensor Last?
A A diesel engine is a very sensitive and complicated piece of machinery. Getting a diesel to crank will require a number of parts to work together. Among the most vital systems on a diesel engine is the fuel injection....
How to Replace an Air Fuel Ratio Sensor
The air fuel ratio sensor fails within a vehicle if the check engine light comes on. Poor engine performance results from oxygen sensor failure.

Crankshaft sensor going out

That is a pretty common failure on the 4.0 engine. Random stalling, long crank, rough idle, or the engine failing to start are all symptoms. Usually a code is stored, but this is not always the case. If you would...

Stalls when shifting and oil leak issue. 2000 Mercedes Benz E55 AMG

First, check to see if the brake light is on when the vehicle is running in park. If the brake lights are on or the brake is pushed at the same time the gas pedal is pushed, you will get...

Replaced thermostat, no leaks,coolant full, still overheats, no water in oil, stumped, sensor maybe?

If the vehicle is registering it is hot and it is just started then you will need to scan and test the temperature sensor to see if the sensor is causing gauge to say hot when it is not or...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com