Chevrolet Impala Limited Camshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(26)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(26)

Camshaft Seal Replacement Service

How much does a Camshaft Seal Replacement cost?

On average, the cost for a Chevrolet Impala Limited Camshaft Seal Replacement is $228 with $10 for parts and $218 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2016 Chevrolet Impala LimitedV6-3.6LService typeCamshaft Seal ReplacementEstimate$283.80Shop/Dealer Price$311.63 - $343.37
2014 Chevrolet Impala LimitedV6-3.6LService typeCamshaft Seal ReplacementEstimate$237.80Shop/Dealer Price$265.67 - $297.44
2015 Chevrolet Impala LimitedV6-3.6LService typeCamshaft Seal ReplacementEstimate$237.80Shop/Dealer Price$265.67 - $297.44
Show example Chevrolet Impala Limited Camshaft Seal Replacement prices

What is the Camshaft Seal all about?

Like the crankshaft, the camshaft is an essential component of the combustion process that moves your car down the road. Its motion is responsible for instigating valve movement, which regulates the air/fuel mixture that fuels the “big bang.” The camshaft uses lobes (called cams) to push against and open the valves as the camshaft rotates (springs on the valves return them to their closed position) in sync with the pistons. Note: Both valves are closed during compression and combustion so that the combustion chamber is sealed.

The camshaft seal fits between the camshaft and the cylinder head, sealing the camshaft between the top of the head and the valve cover. Like all of an engine’s internal moving parts, the camshaft must be well lubricated, essentially submerged in oil, to do its job properly. Without the camshaft seal, this lubricating oil would leak out of the engine block, befouling the engine bay and putting the engine’s internal components in danger from insufficient lubrication. It also keeps contaminants like dust and dirt from damaging the engine’s internal components.

Keep in mind:

  • Typically, camshaft seals do not need to be replaced unless other components, such as the camshaft, are being replaced.
  • Replace the timing belt when replacing the camshaft seals, and vice versa.
  • A leak from the camshaft seal or valve cover gasket are hard to tell apart if the valve cover gasket is leaking in the same area as the cam seal.

How it's done:

  • The battery is disconnected
  • The camshaft timing belt and gear is removed
  • The camshaft seal is replaced
  • The timing gear and timing belt is reinstalled
  • The battery is reconnected and timing checked and vehicle checked for leaks.

Our recommendation:

One of the most important parts of your car, the camshaft seal is made from a durable material, capable of withstanding extreme temperatures and pressures. But if it fails, replacement is the only cure. The good news is that the seal is a relatively inexpensive component, but note that replacing it can be a labor-intensive job.

What common symptoms indicate you may need to replace the Camshaft Seal?

  • Oil leaking from behind the timing cover.
  • The leak will eventually damage the car’s timing belt or cause it to slip, which will in turn throw the entire combustion process off kilter: the engine will run rough, there will be a noticeable loss of power, overheating issues, stalling and backfiring, excess smoke pouring out of the exhaust, and more.

How important is this service?

Loss of oil could cause the engine to seize, and a leak could develop into a potential fire hazard as the mixes with dirt and other contaminants. Replace the camshaft seal sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(26)

Rating Summary
25
1
0
0
0
25
1
0
0
0

Daniel

11 years of experience
54 reviews
Daniel
11 years of experience
Chevrolet Impala Limited V6-3.6L - Smoke from engine or exhaust - Richmond, California
Daniel Came on the house and diagnosed the problem and showed me where and why good job.

Alex

18 years of experience
29 reviews
Alex
18 years of experience
Chevrolet Impala Limited V6-3.6L - Heater Blower Motor - Sacramento, California
Great work!! Great Knowledge!!

Rodney

36 years of experience
542 reviews
Rodney
36 years of experience
Chevrolet Impala Limited V6-3.6L - Car is overheating - Sacramento, California
It was a great experience

Brian

18 years of experience
37 reviews
Brian
18 years of experience
Chevrolet Impala Limited V6-3.6L - Smoke from engine or exhaust - Locust Grove, Georgia
Very knowledgeable

Excellent Rating

(26)

Rating Summary
25
1
0
0
0
25
1
0
0
0
Number of Chevrolet Impala Limited services completed
286+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1600+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Smart ForTwo
Whether Whether you’re won over by the European charm, or you just want a vehicle that will make parking so much easier, you just might enjoy the 2012 Smart ForTwo. However, just be prepared that as the name suggests, this...
P0507 OBD-II Trouble Code: Idle Control System RPM Higher Than Expected
P0507 code definition P0507 is a generic OBD2 diagnostic trouble code (DTC) referencing a fault within the idle control system. This code...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one cylinder. A P2428 trouble code is also associated...

Lucas oil treatment

I use it, yes. But I use it on the older, worn-out engines and it helps build up the compression because it is a thicker oil and I believe it has molybdenum sulfate, which is a very good metal cleaner...

Front end locked up

A couple of different things could cause the front end to lock up like this, though it is a rare sort of problem to occur: the transfer case circuit has failed driveshaft issue ujoints axles locked-up brakes The vehicle is...

RPMs drop and car shakes?

Hi again Jarod. What you're describing is often a sign of a vacuum leak, exhaust leak, fuel restriction or faulty mass air flow sensor (designed to help mix air and fuel together). To be honest, there are more than a...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com