Chevrolet Cobalt Fuel Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(413)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(413)

Fuel Pump Replacement Service

How much does a Fuel Pump Replacement cost?

On average, the cost for a Chevrolet Cobalt Fuel Pump Replacement is $717 with $339 for parts and $378 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Chevrolet CobaltL4-2.4LService typeFuel Pump ReplacementEstimate$1342.83Shop/Dealer Price$1560.79 - $2187.52
2007 Chevrolet CobaltL4-2.0L TurboService typeFuel Pump ReplacementEstimate$1261.89Shop/Dealer Price$1461.23 - $2045.46
2006 Chevrolet CobaltL4-2.2LService typeFuel Pump ReplacementEstimate$1312.65Shop/Dealer Price$1524.77 - $2147.13
2005 Chevrolet CobaltL4-2.0L TurboService typeFuel Pump ReplacementEstimate$1651.03Shop/Dealer Price$1947.74 - $2823.88
2007 Chevrolet CobaltL4-2.4LService typeFuel Pump ReplacementEstimate$1312.65Shop/Dealer Price$1529.70 - $2155.76
2008 Chevrolet CobaltL4-2.0L TurboService typeFuel Pump ReplacementEstimate$1518.53Shop/Dealer Price$1782.59 - $2559.70
2009 Chevrolet CobaltL4-2.2LService typeFuel Pump ReplacementEstimate$1167.75Shop/Dealer Price$1343.69 - $1857.41
2006 Chevrolet CobaltL4-2.0L TurboService typeFuel Pump ReplacementEstimate$1261.89Shop/Dealer Price$1461.31 - $2045.60
Show example Chevrolet Cobalt Fuel Pump Replacement prices

What is the fuel pump and how does it work?

The fuel pump supplies pressurized gasoline to each of the fuel injectors in a car’s engine. The fuel pump is powered by a compact electric motor and is located in the vehicle’s gas tank. The pressure and output of the pump are controlled by a regulator. Filtration of the fuel occurs either in the fuel tank using a pickup screen or externally with a replaceable filter mounted in the fuel supply line.

When to consider replacing the fuel pump?

A high quality, OEM fuel pump can last indefinitely. However, as with any electro-mechanical component, a fuel pump will eventually degrade and fail. If it fails to produce adequate pressure or completely quits operating, it will need to be replaced. This failed condition can sometimes be preceded or accompanied by one or more of the following symptoms:

  • Car won’t start or unexpectedly stalls and won’t re-start. A failed fuel pump may prevent a car from starting or stall it.
  • Check engine light is on. Sometimes a fuel pump will fail slowly, and that means the fuel pressure and volume slowly degrades. The lack of fuel may result in the engine operating without enough fuel relative to the amount of air, causing the check engine light to appear.
  • Whirring noise from fuel tank. As a fuel pump fails, you may notice a whirring or humming noise coming from the fuel tank area, toward the rear of the car. If the noise is from the fuel pump, failure of the pump is often imminent and you should replace the fuel pump at your earliest convenience.

How do mechanics replace the fuel pump?

  • The fuel pump is tested to be sure it isn’t functioning.
  • Should the fuel pump be faulty, it is removed from the tank through an access panel above the tank in the passenger compartment.
  • When no access panel exists, fuel is first drained from the tank and then the fuel tank must be lowered from the vehicle to gain access to the pump.
  • In all cases, fuel pump supply and return hoses, as well as EVAP system hoses, and electrical connections to the pump must be removed.
  • Once the pump is out, any reusable brackets and pick up screens are attached to the new pump, then the new pump is installed.
  • If the fuel system uses an in-line external filter, a filter is often replaced. All hoses and electrical connections are re-established.
  • Fuel is added to the tank and the engine is run to test for leaks.

Is it safe to drive with a fuel pump problem?

Usually, it’s still safe to drive, but the pump may lead to an overheated engine and catalytic converter. Complete fuel pump failure can leave you stranded out on the road, but many times a car won’t start before initially driving.

However, if the fuel pump problem involves leaks of gasoline or vapors, it is unsafe to continue driving, and should immediately be checked by a qualified mechanic.

When replacing the fuel pump keep in mind:

  • Prior to replacing, the mechanic will power the fuel pump directly to confirm that the issue is a failed pump versus a faulty power supply to the pump.
  • Unless the fuel filter was replaced recently, whenever the fuel pump is replaced a new fuel filter should be installed.
  • When failing earlier than expected, the power supply should be verified because a voltage drop in the fuel pump circuit can lead to overheating.
  • Should the fuel tank be lowered during the repair, the fuel tank straps and fasteners should be checked for excessive corrosion and replaced as needed.
  • The fuel in the gas tank cools and lubricates the fuel pump. After installation of a new fuel pump, it’s wise to keep the gas tank at least a quarter full to maximize the life of a new fuel pump.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(413)

Rating Summary
391
16
1
1
4
391
16
1
1
4

Joshua

6 years of experience
35 reviews
Joshua
6 years of experience
Cobalt 2006 - Check Engine Light is on - Lewisville, TX
Joshua was very nice and cordial. He was very quick and explained everything in clear words! Also, I really appreciate that he was exactly on time! Thank you!

Yoel

5 years of experience
187 reviews
Yoel
5 years of experience
Cobalt 2006 - Car is not starting - Philadelphia, PA
Did a great job new what was wrong with it

Chuck

4 years of experience
271 reviews
Chuck
4 years of experience
Cobalt 2008 - Tune-up - Dallas, TX
Awesome work!

Shawn

22 years of experience
62 reviews
Shawn
22 years of experience
Cobalt 2009 - Check Engine Light is on - Hampton, VA
On time, friendly, and knowledge. Did a great job.

Excellent Rating

(413)

Rating Summary
391
16
1
1
4
391
16
1
1
4
Number of Chevrolet Cobalt services completed
4543+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

How Does My Gas Tank Know When It’s Full?
Anyone Anyone who has ever filled up a gas tank has experienced the tactile "clunk" the nozzle makes when the fuel tank is full. This sound comes from the nozzle right when the flow of fuel stops. Most people barely...
P2328 OBD-II Trouble Code: Ignition Coil J Primary Control Circuit High
P2328 P2328 code definition Ignition Coil J Primary Control Circuit High What the P2328 code means P2328 is an OBD-II generic code for the Ignition Coil K Primary Control Circuit High to the Engine Control Module (ECM). This means the...
The Guide to Colored Curb Zones in Alaska
Alaska Alaska parking laws: understanding the basics Many of the cities in Alaska will have their own specific parking laws that apply to that town or municipality only. However, there are a number of regulations and laws that tend to...

How do you use the blind spot mirrors?

Your car may have blind spot mirrors rather than standard side view mirrors (they’re optional equipment). If it’s so equipped, you have an important advantage when attempting to see vehicles to the side and behind, such as when you’re changing...

I have a lighting bolt icon on my dashboard

When you overheated the engine the check engine light came on most likely for the engine is hot and the lightning bolt comes on indicating the throttle limit control is on. This means the engine is in failure mode and...

Delay when pressing the gas peadal + weird sound

Hi there. It sounds like you may be having a concern with the air flow meter; these can send false signals to the ECM without setting a code. Pull the meter and perform a visual inspection checking the exposed wire...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com