Chevrolet Camaro Fuel Injector Replacement Costs

Estimate price near me

Service Location

Customer Ratings

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Chevrolet Camaro Fuel Injector Replacement is $944 with $790 for parts and $154 for labor. Prices may vary depending on your location.

Car	Service	Estimate	Shop/Dealer Price
2017 Chevrolet CamaroV8-6.2L	Service typeFuel Injector Replacement	Estimate$2383.82	Shop/Dealer Price$2937.60 - $4589.20
1991 Chevrolet CamaroV8-5.0L	Service typeFuel Injector Replacement	Estimate$5066.90	Shop/Dealer Price$6191.50 - $9548.40
2015 Chevrolet CamaroV8-7.0L	Service typeFuel Injector Replacement	Estimate$2721.22	Shop/Dealer Price$3318.39 - $5099.86
2000 Chevrolet CamaroV8-5.7L	Service typeFuel Injector Replacement	Estimate$2953.17	Shop/Dealer Price$3653.36 - $5749.32
2014 Chevrolet CamaroV8-6.2L Turbo	Service typeFuel Injector Replacement	Estimate$2989.00	Shop/Dealer Price$3659.96 - $5655.63
1991 Chevrolet CamaroV6-3.1L	Service typeFuel Injector Replacement	Estimate$3697.66	Shop/Dealer Price$4563.43 - $7153.09
1993 Chevrolet CamaroV8-5.7L	Service typeFuel Injector Replacement	Estimate$3281.90	Shop/Dealer Price$4043.52 - $6321.20
1998 Chevrolet CamaroV8-5.7L	Service typeFuel Injector Replacement	Estimate$3088.05	Shop/Dealer Price$3821.96 - $6019.08

Show example Chevrolet Camaro Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(632)

Rating Summary

600

14

1

3

14

600

14

1

3

14

SEE REVIEWS NEAR ME

Eduardo

20 years of experience

570 reviews

Request Eduardo

Eduardo

20 years of experience

Request Eduardo

by Brett

Chevrolet Camaro V8-6.2L - Fuel Injector - Tomball, Texas

Friendly and does the job right.

Andrew

10 years of experience

41 reviews

Andrew

10 years of experience

by Coretta

Chevrolet Camaro V6-3.6L - Oxygen Sensor Replacement (Front/Upper/Upstream, Rear/Lower/Downstream) - Stafford, Texas

On time, repairs were great and effective and car runs like it should again! Planning on using him more for all my car needs!

Jeff

34 years of experience

441 reviews

Jeff

34 years of experience

by Rodney

Chevrolet Camaro V8-5.0L - Fuel Pump - Citrus Heights, California

Cognac

21 years of experience

73 reviews

Cognac

21 years of experience

by Tanmika

Chevrolet Camaro V6-3.6L - Valve Cover Gasket - Memphis, Tennessee

I really appreciate how Cognacs performance was on the car. He was gentle, took his time and looked over everything at three times to make sure that was he did was correct... Thank you very much

Excellent Rating

(632)

Rating Summary

600

14

1

3

14

600

14

1

3

14

SEE REVIEWS NEAR ME

Recent articles & questions

P0006 OBD-II Trouble Code: Fuel Shutoff Valve "A" Control Low

P0006 P0006 code definition The P0006 code is associated with an electrical circuit which connects from your engine computer to your fuel system and is most commonly found on diesel engines. It also may be related to other codes, such...

How to Buy a Car When You Have No Credit History

Can you still buy a car if you have no credit history? Yes, but you'll need to take some extra steps to get approved for a loan with no credit.

Top 10 Best-Selling Cars of 2016

Ford F-series pickup trucks, Toyota Camry, and Honda Civic are some of the best-selling cars of 2016 and all deliver on reliability and efficiency.

water pump replacement. 2011 Buick Lacrosse

Hey there. It does sound as though you need a water pump. Water pumps have very different sealing methods than every other component on your car. This is due to the rotating nature of the pump and the pressure in...

My car sputters when cold but idles smoothly after warmup - 2003 Chevrolet Express 3500

Hi there. Beyond the MAF sensor, in most cases, an engine that stumbles when it's cold is caused by one of three different components: clogged fuel injectors, a dirty throttle body, or an EGR valve (https://www.yourmechanic.com/services/exhaust-gas-recirculation-egr-valve-replacement) that is damaged or...

Why doesn't my car start?

Hi there. It is likely that the ignition switch or ignition relay is damaged. These two components typically cause the type of symptoms you are describing. It might be a good idea to have a professional mechanic come to your...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com