Chevrolet C2500 Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(32)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(32)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Chevrolet C2500 Fuel Injector Replacement is $1180 with $1040 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1997 Chevrolet C2500V8-5.0LService typeFuel Injector ReplacementEstimate$7598.50Shop/Dealer Price$9396.19 - $14765.77
1994 Chevrolet C2500V8-5.0LService typeFuel Injector ReplacementEstimate$4386.27Shop/Dealer Price$5448.17 - $8629.76
1992 Chevrolet C2500V6-4.3LService typeFuel Injector ReplacementEstimate$2607.99Shop/Dealer Price$3225.35 - $5073.24
1991 Chevrolet C2500V8-6.2L DieselService typeFuel Injector ReplacementEstimate$4177.01Shop/Dealer Price$5127.74 - $7968.63
1994 Chevrolet C2500V8-5.7LService typeFuel Injector ReplacementEstimate$4933.33Shop/Dealer Price$6133.50 - $9726.50
1991 Chevrolet C2500V6-4.3LService typeFuel Injector ReplacementEstimate$2607.99Shop/Dealer Price$3225.49 - $5073.49
2000 Chevrolet C2500V8-5.7LService typeFuel Injector ReplacementEstimate$7609.07Shop/Dealer Price$9410.93 - $14804.28
1995 Chevrolet C2500V8-5.0LService typeFuel Injector ReplacementEstimate$4387.25Shop/Dealer Price$5449.42 - $8631.76
Show example Chevrolet C2500 Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(32)

Rating Summary
31
1
0
0
0
31
1
0
0
0

Eduardo

20 years of experience
570 reviews
Eduardo
20 years of experience
Chevrolet C2500 V8-5.7L - Steering Rack/Gearbox - Katy, Texas
Very knowledgeable, capable and polite mechanic.

Jahmar

19 years of experience
36 reviews
Jahmar
19 years of experience
Chevrolet C2500 V8-5.7L - Clutch - Fort Lauderdale, Florida
After 4 failed attempts at fixing my truck from other mechanics, Jahmar was able to figure out my issue in a short amount of time and got me back on the road. I'm very impressed with his knowledge and service.

Carlos

17 years of experience
362 reviews
Carlos
17 years of experience
Chevrolet C2500 V8-5.7L - Fuel Pump - Fort Worth, Texas
Came on time with all the parts needed. Helped me understand more about the truck than I ever knew. Made some suggestions to help from having later problems. Great mechanic.

Rodney

37 years of experience
611 reviews
Rodney
37 years of experience
Chevrolet C2500 V8-5.7L - Other Inspections - Rocklin, California
Rodney is a very professional yet friendly mechanic.He explains things to me and helps me understand what my truck needs.This is the second time I have used Rodnay and I plan to use him again if the need arises.

Excellent Rating

(32)

Rating Summary
31
1
0
0
0
31
1
0
0
0
Number of Chevrolet C2500 services completed
352+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

P0338 OBD-II Trouble Code: Crankshaft Position Sensor A Circuit High Input
P0338 P0338 code definition The P0338 Trouble Code indicates an error with the crankshaft position sensor A circuit high input. What the P0338 code means The powertrain control module has found that the crankshaft position sensor (https://www.yourmechanic.com/services/crankshaft-position-sensor-replacement), or CPS, is...
How to Get Your Car Ready for Summer
There’s There’s no time of the year like summer. And there’s no time better to own a car than when the sun comes out and the summer months roll around. For some people, summer is the time for road trips...
Veteran and Military Driver Laws and Benefits in Missouri
The The state of Missouri offers a number of benefits and perks for those Americans who have either served in an Armed Forces branch in the past, or are current active military members. Disabled veteran registration fee waiver Disabled veteran...

Welding the harmonic balancer to crank shaft? 1991 Chevrolet S10

Hello - No, welding the harmonic balancer to the crankshaft is not a good idea for at least 2 reasons. Welding the balancer hub to the crankshaft will damage or reverse the benefits of heat-treatment to the crankshaft itself -...

Having hard time getting AC hose hooked up.

I have had a break down mechanic try to start my car this morning. He has advised that the rocker cover gasket needs replacing.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com