logo

Chevrolet Bolt EV Brake Drum Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

(5)

Brake Drum Replacement Service

How much does a Brake Drum Replacement cost?

On average, the cost for a Chevrolet Bolt EV Brake Drum Replacement is $353 with $191 for parts and $161 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Chevrolet Bolt EVElectricService typeBrake Drum ReplacementEstimate$577.76Shop/Dealer Price$690.34 - $989.80
2017 Chevrolet Bolt EVElectricService typeBrake Drum ReplacementEstimate$543.76Shop/Dealer Price$656.37 - $955.85
2019 Chevrolet Bolt EVElectricService typeBrake Drum ReplacementEstimate$577.64Shop/Dealer Price$698.71 - $1023.61
Show example Chevrolet Bolt EV Brake Drum Replacement prices

What are brake drums and how do they work?

A brake drum is a heavy, cast iron brake system part that looks like a shallow, several inches-high cylinder about 9 to 12 inches in diameter. The brake drum has a precisely machined surface all around the interior circumference, that the brake shoes make contact with when you apply the brakes, transmitting hydraulic pressure through the wheel cylinder. This forces the brake shoes outward against the interior of the brake drum, resulting in the friction that causes the car to slow. The brake drum is mounted over, and fully encloses, all of the rear brake components such as the wheel cylinder, springs and clips, brake shoes, and parking brake mechanism. The drum is commonly held to the wheel hub by the wheel and the lug nuts, but some configurations combine the drum with the wheel hub as one unit. Nowadays, a drum brake type system is only installed on the rear axle, if used at all, as 4 wheel disc type systems have become more common.

When to consider replacing brake drums:

  • Reduced braking effectiveness. If the brake drum is unevenly worn, scored or cracked, it will increase stopping distances. A cracked drum must be replaced outright but a worn drum can be restored on a brake lathe so long as enough metal material remains.
  • Pulsating brakes, pulling to one side, vibration or noise. If a brake drum is warped, is unevenly worn, or perhaps the brake shoes have worn down completely — creating metal-to-metal contact — you might detect pedal pulsation, the vehicle may pull to one side, or you might feel a vibration or hear a noise when you apply the brakes. The brake system will have to be inspected to pinpoint the exact problem.
  • Brake shoe replacement. Anytime the brake shoes are replaced, the drum must either be resurfaced or replaced outright. Installing new brake shoes on a used, unresurfaced drum will lead to poor results.
  • Loss of parking brake function. The parking brake locks the brake shoes against the brake drum. If the brake drum is cracked, the parking brake lever will pull up excessively and the car may still be able to roll. However, a more common circumstance is parking brake maladjustment or seizure of parking brake components. Repair of those problems will often require removal of the brake drum.

How do mechanics replace brake drums?

There are two options when it comes to brake drum service: outright replacement or resurfacing. In some cases, it is cheaper to replace the drum rather than refurbish it. In both cases though, the removal and installation procedure for the drum is the same.

  • Raise the vehicle and safely support it using steel jack stands.
  • Remove tire and wheel assembly.
  • Remove brake drum. Sometimes the brake drum has rusted to the wheel hub and removal of the drum will require a brake drum puller. In some cases, the wheel hub is integral to the brake drum, in which case the hub-bearing retaining bolt and the wheel bearing must be removed to replace the drum.
  • Measure the interior diameter of the machined surface in the drum with a brake drum micrometer or similar measuring tool. If sufficient metal exists to resurface the drum on a brake lathe, the mechanic will compare the cost of such restoration to the alternative: buying a new drum.
  • Prior to installing the resurfaced or new drum, the brake shoes, springs, wheel cylinder, parking brake mechanism, and backing plate are all inspected. All worn parts should be replaced. Generally, if drums have been replaced or resurfaced, new brake shoes should be installed. The worn shoes will cause irregular wear in the brake drum and reduce braking effectiveness.
  • The shoes are adjusted and the drum is installed. The wheel and tire assembly are installed and torqued in the proper sequence and the car is road tested to check the operation of the brakes.

Is it safe to drive with a brake drum problem?

No. Should there be a deficiency with the brake drums, stopping distances will not be as short as possible. In a panic stop, stopping just five or ten feet shorter could be the difference between no collision and a collision. Any deficiency in a vehicle’s braking system is a cause for concern and a potential safety issue. Have the brake drums inspected at your earliest convenience to determine if a problem exists and find out what must be done to fix it.

When replacing brake drums keep in mind:

  • With few exceptions, brake work on one end of an axle should be performed on both ends of the axle. Should a brake drum on one end of a front or rear axle be serviced, or brake shoes on one end are serviced, both sides of the axle should receive the same service. This helps to avoid problems, such as pulling, vibration, and so forth, once the vehicle is returned for use.
  • Brake drum systems use very powerful springs to keep the brake shoes in position. These springs are exposed to extreme heat. It is best practice to replace all springs whenever new shoes are installed. Should a spring unexpectedly break in the brake drum assembly, a mispositioned brake shoe could cause the brakes to grab and lock, which would pose a safety issue.
  • If the wheel hub and bearing are integral to the brake drum on your car, the mechanic may recommend replacement of the grease in the wheel bearings and inspection of the wheel bearings.
  • Since the arc of the brake shoes will not perfectly match with the arc of the drum when new, expect a bed-in period before maximum braking efficiency is achieved.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Number of Chevrolet Bolt EV services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1600+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(5)
Rating Summary
5
0
0
0
0
5
0
0
0
0

Jason

32 years of experience
515 reviews
Request Jason
Jason
32 years of experience
Request Jason
by Shawn
Chevrolet Bolt EV Electric - ABS Speed Sensor Replacement (Driver Side Front) - San Mateo, California
Nice guy. Competent.

Chris

16 years of experience
419 reviews
Request Chris
Chris
16 years of experience
Request Chris
by Divya
Chevrolet Bolt EV Electric - Tire Rotation - San Francisco, California
Chris was really friendly and very quick about servicing my car. Would definitely book with him again.

Andre

16 years of experience
45 reviews
Request Andre
Andre
16 years of experience
Request Andre
by Yoseff
Chevrolet Bolt EV Electric - Pre-purchase Car Inspection - Laurel, Maryland
He was on time communication in HIGH level very nice and very professional

Pierre

9 years of experience
309 reviews
Request Pierre
Pierre
9 years of experience
Request Pierre
by Ezra
Chevrolet Bolt EV Electric - Pre-purchase Car Inspection - Roslindale, Massachusetts
Pierre was a real professional. On-time, clear communication, performed a thorough pre-purchase inspection, and documented his findings. Would definitely reach out to Pierre for future needs!

Excellent Rating

(5)
Rating Summary
5
0
0
0
0
5
0
0
0
0
Number of Chevrolet Bolt EV services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1600+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Recent articles & questions

The Traveler’s Guide to Driving in the Netherlands
The The Netherlands are a massively popular vacation destination, and many of the travelers will spend much of their time in Amsterdam. They can explore the city, visit the Anne Frank House, the Van Gogh Museum, and the Rijksmuseum. However,...
Read more
Disabled Driver Laws and Permits in Alaska
Each Each state has its own special requirements for disabled drivers. Below are some of the qualifications you must have in the state of Alaska to obtain a disabled driver license plate and/or permit. How do I know if I...
Read more
How to Adjust Drum Brakes
Many vehicles come equipped with drum brakes (https://www.yourmechanic.com/article/how-drum-brakes-work). For many years, disc brakes have been used at the front of the vehicles...
Read more

AC/Heat not working anymore

This is a common sign of a failing blower motor relay. The relay is a unit that supplies power to the heat/AC blower motor. When this relay is faulty, the blower motor may work intermittently or sometimes not at all....
Read more

Abs problem light on at the time of driving

Your car is equipped with wheel speed sensors at each of the four wheels which monitor wheel speed while relaying this information constantly to the ABS and traction control system which are controlled by the car's ECU. When the ECU...
Read more

08 impala has engine power reduced light on. Car starts

Hello, Unfortunately, this is a common issue in many Impalas. This can happen when the catalytic converter (https://www.yourmechanic.com/services/catalytic-converter-replacement) is clogged or has also been known to happen when the traction control system (https://www.yourmechanic.com/services/traction-control-switch-replacement) has encountered an error. This light comes...
Read more
  1. Home
  2. Estimates
  3. Chevrolet
  4. Bolt EV
  5. Brake Drum Replacement

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com

Read FAQ
GET A QUOTE