Chevrolet Avalanche 2500 Cruise control is not working Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(4)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(4)

Cruise control is not working Inspection Service

How much does a Cruise control is not working Inspection cost?

On average, the cost for a Chevrolet Avalanche 2500 Cruise control is not working Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Chevrolet Avalanche 2500V8-8.1LService typeCruise control is not working InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2004 Chevrolet Avalanche 2500V8-8.1LService typeCruise control is not working InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2002 Chevrolet Avalanche 2500V8-8.1LService typeCruise control is not working InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2005 Chevrolet Avalanche 2500V8-8.1LService typeCruise control is not working InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2003 Chevrolet Avalanche 2500V8-8.1LService typeCruise control is not working InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
Show example Chevrolet Avalanche 2500 Cruise control is not working Inspection prices

Cruise control can be very convenient when on a long drive or when on the highway. By setting a speed, you can relax your foot and let the vehicle maintain speed. More modern cruise control systems even allow you to maintain speed and a certain distance behind the vehicle in front of you. When cruise control fails, it can be annoying, but when it fails suddenly it may be dangerous. A sudden failure by the cruise control may mean your vehicle is rapidly decelerating. Even when cruise control is on, it is important to remain a vigilant driver.

How this system works:

Cruise control systems have changed as cars have become more modern. Newer cars use a fully electronic setup to maintain speed and may be able to maintain speed and distance behind the car in front of you. These systems are controlled through the vehicle’s computer or ECU (electronic control unit). Older cars may use what is called electromechanical cruise control. In this setup, a vacuum actuator is physically connected to the throttle by a cable or chain. The cable adjusts to increase or decrease throttle position based upon the actions of the actuator. A mechanic will let you know what kind of setup you have on your vehicle.

Common reasons for this to happen:

  • Bad Fuse: Like many electronically controlled systems in your car, the cruise control has a corresponding fuse which will blow to protect the system if it senses a short circuit. When the fuse of for the cruise control blows, the cruise control will stop working altogether.

  • Failing Brake Pedal Switch: The brake pedal switch turns on the vehicles brake lights when it senses that the brake pedal has been pressed. Because cruise control systems have been designed to disengage when the brake pedal is pressed, the cruise control is wired to the brake pedal switch. If the brake pedal switch fails, the car may think the brakes are engaged and not allow the cruise control system to turn on.

  • Failing Speed Sensor: A speed sensor has many purposes including indicating the speed of the vehicle, regulating flow of fuel and ignition timing, and operating the cruise control. If the speed sensor fails the cruise control may stop working. You may also notice that the speedometer has stopped working and the engine has more difficulty when idling.

  • Damaged Vacuum Actuator/Hoses/Cable: On older vehicles, cruise control speed is maintained using a vacuum actuator and a cable connected to the throttle. A vehicle’s cruise control may stop working if the vacuum actuator has stopped working or if there is damage to the vacuum hoses. The system may also fail if the cable linking the actuator to the throttle is broken.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason why your vehicle’s cruise control system has stopped working. The mechanic will then provide a detailed inspection report outlining the nature of the system failure and the cost of any repairs that need to be made.

How it's done:

The mechanic will first want to connect to the vehicle’s ECU through a code reader/scanner. This will allow the mechanic to read and trouble codes and better diagnose what component may have failed.

If the mechanic determines that there is a bad fuse, he or she will find the corresponding fuse for the cruise control system to see if it has failed. If the fuse has blown, the mechanic will remove it and replace it with a fuse rated for the correct amperage.

If the mechanic believes that the brake pedal switch has failed, he or she will examine the switch to check for any superficial damage. The mechanic should then check the wiring connected to the switch and change it if necessary. When the switch has been replaced, the mechanic should make sure that both the brake lights and the cruise control system are working properly.

To check the speed sensor, the mechanic will have to get underneath the vehicle. While underneath, the mechanic will find the sensor and examine it and the surrounding wires for damage. The mechanic will then replace the sensor and then check the wires going from the sensor up to the speedometer and cruise control switches to endure that they are not frayed.

If the mechanic believes that the vacuum actuator or the corresponding hoses and cable have failed, he or she will open the hood and locate the actuator. The mechanic will first check the hoses and cable to make sure that they are in good working order. He or she will then replace the actuator as necessary.

In all of these repair scenarios the mechanic will ask to test drive the vehicle to make sure that the cruise control is working properly. He or she should also use their code reader/scanner to clear any trouble codes that may have been produced when the cruise control system was not working.

How important is this service?

A failed cruise control system can be a signal that other repairs may need to be made soon. By examining the cruise control, the mechanic is likely to also inspect other systems on the car including the brake lights and speedometer. While driving without cruise control may be an inconvenience, a sudden failure of the cruise control system could be potentially dangerous for a driver who is not vigilant. If you notice that your vehicle’s cruise control has stopped working you should have a mechanic check it to determine the nature of the problem.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(4)

Rating Summary
3
1
0
0
0
3
1
0
0
0

Peter

43 years of experience
1321 reviews
Peter
43 years of experience
Chevrolet Avalanche 2500 V8-8.1L - Battery - Tempe, Arizona
Peter was on time and promtply dealt with the battery replacemnet and did a fair assesment of the vehicle. The vehicle started prompltly and he found it to be in fine working order.

Faraz

22 years of experience
68 reviews
Faraz
22 years of experience
Chevrolet Avalanche 2500 V8-8.1L - Transfer case fluid is low - Pleasanton, California
Great experience!

Vladimir

10 years of experience
214 reviews
Vladimir
10 years of experience
Chevrolet Avalanche 2500 V8-8.1L - camshaft position sensor pigtail - Elk Grove, California
Vladimir is very knowledgeable with electrical systems and has been a great mechanic for my vehicle. He often goes above and beyond to help diagnose or fix any issues. Such a pleasure working with someone that knows what he's talking about and can help explain the issues or give advice on how to resolve your issues. His availability is top notch and he even makes the trek to where you are to help. Can't say enough about his workmanship and professionalism.

Jeff

33 years of experience
441 reviews
Jeff
33 years of experience
Chevrolet Avalanche 2500 V8-8.1L - Oil Change - Elk Grove, California
Professional and was on time Very pleased and will use again.

Excellent Rating

(4)

Rating Summary
3
1
0
0
0
3
1
0
0
0
Number of Chevrolet Avalanche 2500 services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1600+
experts on our platform

Recent articles & questions

How Long Do Oil Cooler Lines Last?
The The only way that an engine will be able to run as intended is by having the right internal temperature. With all of the different things that can cause an engine’s internal temperature to rise, it will be a...
P0054 OBD-II Trouble Code: HO2S Heater Resistance (Bank 1, Sensor 2)
P0054 code definition HO2S Heater Resistance (Bank 1 Sensor 2) What the P0054 code means This code means the Heated Oxygen Sensor...
Top 10 Car Hacks
Simplify your life with ten car hacks: charge your phone while you drive, use a tennis ball to park, and prevent dings with pool noodles.

Car shuts down randomly while driving

Yes, from what you describe it would appear that the ABS module may be having an issue. The flashing light indicates that a problem has occurred, and that the ABS system is disabled. The vehicle should still brake and stop...

Emissions test failed with a new gas cap

Hey there. This may be related to other possible malfunctions in your EVAP system, such as a faulty vent valve solenoid (https://www.yourmechanic.com/services/evaporation-vent-solenoid-replacement). The EVAP system prevents fuel vapors from the fuel tank from escaping into the atmosphere. The EVAP system...

Where I could find the clips that hold the back seat cushion down on a 1999 Grand Prix GT?

Hello, thank you for writing in. Start by going to an vehicle upholstery shop to get an idea of what that exact piece is called, and what you can do about obtaining one. There are many types of clips, and...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com