Cadillac CTS Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(551)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(551)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Cadillac CTS Fuel Injector Replacement is $659 with $463 for parts and $196 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Cadillac CTSL4-2.0L TurboService typeFuel Injector ReplacementEstimate$1365.86Shop/Dealer Price$1658.12 - $2523.54
2017 Cadillac CTSV8-6.2L TurboService typeFuel Injector ReplacementEstimate$3759.76Shop/Dealer Price$4640.78 - $7276.80
2016 Cadillac CTSV6-3.6L TurboService typeFuel Injector ReplacementEstimate$2579.88Shop/Dealer Price$3141.73 - $4809.01
2013 Cadillac CTSV8-6.2L TurboService typeFuel Injector ReplacementEstimate$2975.54Shop/Dealer Price$3662.91 - $5712.57
2006 Cadillac CTSV6-3.6LService typeFuel Injector ReplacementEstimate$1694.28Shop/Dealer Price$2041.17 - $3049.08
2010 Cadillac CTSV8-6.2L TurboService typeFuel Injector ReplacementEstimate$2489.14Shop/Dealer Price$3055.33 - $4740.51
2008 Cadillac CTSV6-3.6LService typeFuel Injector ReplacementEstimate$1291.08Shop/Dealer Price$1530.80 - $2231.52
2003 Cadillac CTSV6-3.2LService typeFuel Injector ReplacementEstimate$1496.06Shop/Dealer Price$1796.93 - $2683.45
Show example Cadillac CTS Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Cadillac mechanics

Real customer reviews from Cadillac owners like you.

Excellent Rating

(551)

Rating Summary
522
16
3
3
7
522
16
3
3
7

Maurice

20 years of experience
39 reviews
Maurice
20 years of experience
CTS 2007 - Battery - North Charleston, SC
Right on time, thorough, and quick to complete work. Very good.

Devin

6 years of experience
15 reviews
Devin
6 years of experience
CTS 2003 - Car is not starting - Lakeland, FL
Devin did a great job.

Dan

32 years of experience
1001 reviews
Dan
32 years of experience
CTS 2012 - Brake Rotor/Disc - Suwanee, GA
Experienced/ fast work

Shawn

10 years of experience
177 reviews
Shawn
10 years of experience
CTS 2010 - Crankshaft Position Sensor - East Norriton, PA
shawn was excellent. he was professional and knowledgeable. i would gladly use him again and recommend him to others

Excellent Rating

(551)

Rating Summary
522
16
3
3
7
522
16
3
3
7
Number of Cadillac CTS services completed
6061+
services done by our mechanics
TOTAL NUMBER OF EXPERT Cadillac MECHANICS
1000+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Cylinder Head Temperature Sensor
Common signs include long cranking time, engine performance issues, and the Check Engine Light coming on.
Symptoms of a Bad or Failing Fuel Filler Cap
Common signs include the cap not tightening properly, a fuel smell in the car, and the Check Engine Light coming on.
How to Replace a Lost or Stolen Car Title in Oregon
It's It's hard to keep track of all our important pieces of information and ID. Your car title is one of those items you may have lost track of over the years, and suddenly now that you're ready to transfer...

Can I still drive my car even if my clutch master cylinder is bad? Or will it cause problems??

Yes it may cause problems. You could put stress on the transmission input shaft and gears, the engine crankshaft and the drive train of the vehicle. Some of these components could get broken. If you are in need of a...

MISFIRE CYLINDER NUMBER 3

Hi There, There are several reasons that can cause a valve to burn. One is normal wear and tear. As miles are put on an engine, the constant pounding and heat erosion wears away the metal on the face of...

Engine shut off while driving will not start

If the timing chain broke, there would be no (or little) compression and upon re-starting it might not seem as though the starter is engaging because the mechanical resistance to turning is so low. Of course it is also possible...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com