Cadillac Brougham Brake Pad Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(23)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(23)

Brake Pad Replacement Service

How much does a Brake Pad Replacement cost?

On average, the cost for a Cadillac Brougham Brake Pad Replacement is $216 with $48 for parts and $168 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 Cadillac BroughamV8-5.0LService typeBrake Pads - Rear ReplacementEstimate$347.50Shop/Dealer Price$392.19 - $507.83
1991 Cadillac BroughamV8-5.7LService typeBrake Pads - Front ReplacementEstimate$336.31Shop/Dealer Price$380.44 - $504.17
1992 Cadillac BroughamV8-5.7LService typeBrake Pads - Front ReplacementEstimate$336.31Shop/Dealer Price$380.49 - $504.26
1990 Cadillac BroughamV8-5.0LService typeBrake Pads - Rear ReplacementEstimate$285.51Shop/Dealer Price$316.99 - $402.65
1991 Cadillac BroughamV8-5.7LService typeBrake Pads - Rear ReplacementEstimate$335.79Shop/Dealer Price$379.87 - $495.05
1990 Cadillac BroughamV8-5.7LService typeBrake Pads - Rear ReplacementEstimate$285.51Shop/Dealer Price$317.28 - $403.17
1992 Cadillac BroughamV8-5.7LService typeBrake Pads - Rear ReplacementEstimate$496.38Shop/Dealer Price$540.75 - $656.15
1990 Cadillac BroughamV8-5.0LService typeBrake Pads - Front ReplacementEstimate$336.31Shop/Dealer Price$380.49 - $504.25
Show example Cadillac Brougham Brake Pad Replacement prices

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Cadillac mechanics

Real customer reviews from Cadillac owners like you.

Excellent Rating

(23)

Rating Summary
23
0
0
0
0
23
0
0
0
0

Raymond

38 years of experience
613 reviews
Raymond
38 years of experience
Cadillac Brougham V8-5.7L - Vehicle Engine Mechanical - Las Vegas, Nevada
Talent and passion for what you do in any field is critical, Raymond seems to have both. I have dealt with many Mechanics in my day Raymond is one of the best. Thank you sir.

Jeremy

21 years of experience
802 reviews
Jeremy
21 years of experience
Cadillac Brougham V8-5.0L - Shock Absorber Replacement (Front) - Delray Beach, Florida
Outstanding service,Jeremy was on time and did a great job. Highly recommended.

Joseph

34 years of experience
540 reviews
Joseph
34 years of experience
Cadillac Brougham V8-5.7L - Windshield Wiper Motor Replacement (Front) - Dallas, Texas
It was a very great first-time experience using your mechanic. Joseph was very knowledgeable and skillful I would definitely recommend to anybody. thank you for the great work you've done I really appreciate it

Mike

27 years of experience
265 reviews
Mike
27 years of experience
Cadillac Brougham V8-5.0L - Windshield Wiper Motor Replacement (Front) - Detroit, Michigan
Very friendly and professional.

Excellent Rating

(23)

Rating Summary
23
0
0
0
0
23
0
0
0
0
Number of Cadillac Brougham services completed
253+
services done by our mechanics
TOTAL NUMBER OF EXPERT Cadillac MECHANICS
1000+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Blower Motor Switch
If your blower motor switch only works on certain settings, gets stuck, or has a broken knob, you may need to replace your blower motor switch.
Symptoms of a Bad or Failing Throttle Body Temp Sensor
Common signs include poor engine performance, stalling, and broken electrical connections.
Customer Service 101 For Car Mechanics
Automotive technician jobs require customer service skills as much as technical skills. Communication and cleanliness are part of great service.

My car overheated with smoke coming out, I found antifreeze all over the engine and the temperature gauge was high

This can be caused by a number of things such as low coolant levels, a faulty thermostat (https://www.yourmechanic.com/services/thermostat-replacement), or a failing coolant fan switch. As you may know, the coolant fan switch (https://www.yourmechanic.com/services/cooling-fan-relay-replacement) helps to maintain the proper coolant temperature...

My Sentra makes a Knocking sound when I Accelerate or Brake

You probably have one or more motor mounts failing. The motor mounts have a rubber buffer in them to soak up the engine vibrations and when they get tired the engine can shift around a little bit. The one that...

Car will crank but won't start, mechanic says the fuel pump is fine, I'm not sure why, also the battery died quickly from trying t

Hi there. If a car will crank over but will not start, it is typically due to one of two issues. First, the engine is not getting enough fuel or not the right mixture of air to fuel. Second, the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com