Buick Regal Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(227)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(227)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a Buick Regal Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2002 Buick RegalV6-3.8LService typeWindows InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1990 Buick RegalV6-3.8LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2017 Buick RegalL4-2.0L TurboService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2004 Buick RegalV6-3.8L TurboService typeWindows InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1985 Buick RegalV8-5.0LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1997 Buick RegalV6-3.8LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1977 Buick RegalV8-5.0LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1983 Buick RegalV8-5.0LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Buick Regal Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Buick mechanics

Real customer reviews from Buick owners like you.

Excellent Rating

(227)

Rating Summary
214
4
1
0
8
214
4
1
0
8

Joshua

27 years of experience
709 reviews
Joshua
27 years of experience
Buick Regal V6-3.8L - Windows - Vallejo, California
Great

Brandon

18 years of experience
318 reviews
Brandon
18 years of experience
Buick Regal L4-2.0L Turbo - Wheel Hub Assembly Replacement (Passenger Side Rear) - Morrisville, North Carolina
Brandon was very professional, and thorough with the job. He showed up on time and was vey polite and helpful.

Patrick

32 years of experience
369 reviews
Patrick
32 years of experience
Buick Regal V6-2.8L - Alternator - Las Vegas, Nevada

David

16 years of experience
636 reviews
David
16 years of experience
Buick Regal V6-3.8L - Brake Pads Replacement (Rear) - Sacramento, California
Easy to speak to, explained the work being done, knowledgeable, kept in phone contact before arriving.

Excellent Rating

(227)

Rating Summary
214
4
1
0
8
214
4
1
0
8
Number of Buick Regal services completed
2497+
services done by our mechanics
TOTAL NUMBER OF EXPERT Buick MECHANICS
800+
experts on our platform

Recent articles & questions

How Air Filters Affect Horsepower
Air Air filters work to clean the air entering your engine’s combustion chamber. A good supply of air and oxygen is very essential so that the engine can burn fuel efficiently and give you the horsepower you need to drive....
Symptoms of a Bad or Failing Pitman Arm
If your steering wheel feels loose, you loose the ability to steer, or the car starts wandering on the road, you may need to replace the pitman arm.
P0648 OBD-II Trouble Code: Immobilizer Lamp Control Circuit
P0648 code means an abnormal reading in the immobilizer lamp control circuit has been detected due to a defective bulb, circuit, or faulty wiring.

Gages won't move and car needs a jump to start.

Hi there: The problem with electrical issues is that without being there to diagnose the problem, it's hard to tell you exactly what's wrong. Some of the common reasons why your car won't start based on the symptoms you've described...

Van loses power, engine misfires - 1990 Volkswagen Vanagon

First, you should check out normal tune-up (https://www.yourmechanic.com/services/tune-up) items (plugs (https://www.yourmechanic.com/services/spark-plugs-replacement), wires (https://www.yourmechanic.com/services/ignition-cable-spark-plug-wires-replacement), rotor & cap (https://www.yourmechanic.com/services/distributor-rotor-and-cap-replacement), etc.), then check ground straps from the engine to the chassis. Next, check the fuel injection system, since the air flow meter or...

Stalling at low speeds and idle.

You may have a dirty or failing idle air control valve. The idle air control valve reads the air intake as it is mixed with fuel prior to being injected into the engine at low speeds and at idle. Since...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com