Buick Regal Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(4)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(4)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a Buick Regal Power Steering Pump Replacement is $230 with $90 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1999 Buick RegalV6-3.8L TurboService typePower Steering Pump ReplacementEstimate$472.62Shop/Dealer Price$545.08 - $751.93
2017 Buick RegalL4-2.0L TurboService typePower Steering Pump ReplacementEstimate$773.59Shop/Dealer Price$921.92 - $1361.56
2014 Buick RegalL4-2.0L TurboService typePower Steering Pump ReplacementEstimate$773.59Shop/Dealer Price$921.95 - $1361.62
2001 Buick RegalV6-3.8L TurboService typePower Steering Pump ReplacementEstimate$475.51Shop/Dealer Price$545.89 - $751.18
2001 Buick RegalV6-3.8LService typePower Steering Pump ReplacementEstimate$475.51Shop/Dealer Price$547.95 - $754.79
2014 Buick RegalL4-2.4L HybridService typePower Steering Pump ReplacementEstimate$801.93Shop/Dealer Price$957.56 - $1418.61
2011 Buick RegalL4-2.0L TurboService typePower Steering Pump ReplacementEstimate$823.37Shop/Dealer Price$984.20 - $1461.21
2003 Buick RegalV6-3.8LService typePower Steering Pump ReplacementEstimate$475.51Shop/Dealer Price$545.89 - $751.18
Show example Buick Regal Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Buick mechanics

Real customer reviews from Buick owners like you.

Excellent Rating

(4)

Rating Summary
3
0
0
0
1
3
0
0
0
1

Jim

30 years of experience
147 reviews
Jim
30 years of experience
Regal 2000 - Power Steering Pump - Livermore, CA
Arrived at the scheduled time, was completely prepared to do a difficult job. He is the best mechanic I've seen in a very long time. I have nothing but thanks and praise for Jim. I to recommend 'your mechanic' to any one that needs a good mechanic.

Roneil

11 years of experience
5 reviews
Roneil
11 years of experience
Regal 2013 - Alternator - Palm Coast, FL
He did and awesome job

Alfonso

10 years of experience
5 reviews
Alfonso
10 years of experience
Regal 2016 - Brake Pads - Modesto, CA
Super friendly and knowledgeable

Jay

20 years of experience
66 reviews
Jay
20 years of experience
Regal 2013 - Wheel Speed Sensor - Maywood, IL
Friendly and knowledgeable, I would definitely recommend.

Excellent Rating

(4)

Rating Summary
3
0
0
0
1
3
0
0
0
1
Number of Buick Regal Power Steering Pump Replacement services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Buick MECHANICS
800+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Blind Spot Mirror
All All cars have blind spots – those areas beside and behind your car where you just can’t see. Even your car’s side view mirrors do little to help here. This can make driving on multi-lane roads more than a...
P0929 OBD-II Trouble Code: Gear Shift Lock Solenoid Circuit Range/Performance
P0929 means there is an issue with the gear shift lock solenoid circuit, possibly due to fluid or battery voltage issues, or faulty wiring.
The Guide To Colored Curb Zones in Oregon
###Oregon ###Oregon parking laws: understanding the basics When you are driving throughout Oregon, you need to know all of the laws that are applicable to driving and to keeping safe. Of course, it is also important to know the laws...

Car shakes and won't accelerate.

This may be due to an issue with your ignition system. A severe misfire can cause an engine to accelerate very poorly and can also cause the vehicle to shake badly. If you have a check engine light I would...

Experiencing a slight rattle and loss of power.

Is this an automatic or manual transmission? I need to know what type of transmission you have because this rattling sound could be different things depending if it is an auto trans or manual. Either way I would recommend that...

Car stalled and rattled upon restart

The stall and rattling sounds like the timing chain tensioner may have failed and the timing chain is rattling. The chain tensioner would have to be checked for failure. I recommend you have a mechanic, like ones from YourMechanic, inspect...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com