Buick Park Avenue Brake Drum Replacement Costs

Estimate price near me

Service Location

Customer Ratings

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

Brake Drum Replacement Service

How much does a Brake Drum Replacement cost?

On average, the cost for a Buick Park Avenue Brake Drum Replacement is $280 with $157 for parts and $123 for labor. Prices may vary depending on your location.

Car	Service	Estimate	Shop/Dealer Price
1991 Buick Park AvenueV6-3.8L	Service typeBrake Drum Replacement	Estimate$589.52	Shop/Dealer Price$691.90 - $945.06
1998 Buick Park AvenueV6-3.8L Turbo	Service typeBrake Drum Replacement	Estimate$547.73	Shop/Dealer Price$666.81 - $994.76
1994 Buick Park AvenueV6-3.8L	Service typeBrake Drum Replacement	Estimate$595.94	Shop/Dealer Price$711.97 - $1005.97
1992 Buick Park AvenueV6-3.8L Turbo	Service typeBrake Drum Replacement	Estimate$652.93	Shop/Dealer Price$774.91 - $1073.36
1997 Buick Park AvenueV6-3.8L Turbo	Service typeBrake Drum Replacement	Estimate$547.73	Shop/Dealer Price$666.83 - $994.79
1992 Buick Park AvenueV6-3.8L	Service typeBrake Drum Replacement	Estimate$652.93	Shop/Dealer Price$774.97 - $1073.48
1997 Buick Park AvenueV6-3.8L	Service typeBrake Drum Replacement	Estimate$554.23	Shop/Dealer Price$673.13 - $1000.95
1991 Buick Park AvenueV6-3.8L Turbo	Service typeBrake Drum Replacement	Estimate$553.52	Shop/Dealer Price$656.51 - $910.12

Show example Buick Park Avenue Brake Drum Replacement prices

What are brake drums and how do they work?

A brake drum is a heavy, cast iron brake system part that looks like a shallow, several inches-high cylinder about 9 to 12 inches in diameter. The brake drum has a precisely machined surface all around the interior circumference, that the brake shoes make contact with when you apply the brakes, transmitting hydraulic pressure through the wheel cylinder. This forces the brake shoes outward against the interior of the brake drum, resulting in the friction that causes the car to slow. The brake drum is mounted over, and fully encloses, all of the rear brake components such as the wheel cylinder, springs and clips, brake shoes, and parking brake mechanism. The drum is commonly held to the wheel hub by the wheel and the lug nuts, but some configurations combine the drum with the wheel hub as one unit. Nowadays, a drum brake type system is only installed on the rear axle, if used at all, as 4 wheel disc type systems have become more common.

When to consider replacing brake drums:

Reduced braking effectiveness. If the brake drum is unevenly worn, scored or cracked, it will increase stopping distances. A cracked drum must be replaced outright but a worn drum can be restored on a brake lathe so long as enough metal material remains.
Pulsating brakes, pulling to one side, vibration or noise. If a brake drum is warped, is unevenly worn, or perhaps the brake shoes have worn down completely — creating metal-to-metal contact — you might detect pedal pulsation, the vehicle may pull to one side, or you might feel a vibration or hear a noise when you apply the brakes. The brake system will have to be inspected to pinpoint the exact problem.
Brake shoe replacement. Anytime the brake shoes are replaced, the drum must either be resurfaced or replaced outright. Installing new brake shoes on a used, unresurfaced drum will lead to poor results.
Loss of parking brake function. The parking brake locks the brake shoes against the brake drum. If the brake drum is cracked, the parking brake lever will pull up excessively and the car may still be able to roll. However, a more common circumstance is parking brake maladjustment or seizure of parking brake components. Repair of those problems will often require removal of the brake drum.

How do mechanics replace brake drums?

There are two options when it comes to brake drum service: outright replacement or resurfacing. In some cases, it is cheaper to replace the drum rather than refurbish it. In both cases though, the removal and installation procedure for the drum is the same.

Raise the vehicle and safely support it using steel jack stands.
Remove tire and wheel assembly.
Remove brake drum. Sometimes the brake drum has rusted to the wheel hub and removal of the drum will require a brake drum puller. In some cases, the wheel hub is integral to the brake drum, in which case the hub-bearing retaining bolt and the wheel bearing must be removed to replace the drum.
Measure the interior diameter of the machined surface in the drum with a brake drum micrometer or similar measuring tool. If sufficient metal exists to resurface the drum on a brake lathe, the mechanic will compare the cost of such restoration to the alternative: buying a new drum.
Prior to installing the resurfaced or new drum, the brake shoes, springs, wheel cylinder, parking brake mechanism, and backing plate are all inspected. All worn parts should be replaced. Generally, if drums have been replaced or resurfaced, new brake shoes should be installed. The worn shoes will cause irregular wear in the brake drum and reduce braking effectiveness.
The shoes are adjusted and the drum is installed. The wheel and tire assembly are installed and torqued in the proper sequence and the car is road tested to check the operation of the brakes.

Is it safe to drive with a brake drum problem?

No. Should there be a deficiency with the brake drums, stopping distances will not be as short as possible. In a panic stop, stopping just five or ten feet shorter could be the difference between no collision and a collision. Any deficiency in a vehicle’s braking system is a cause for concern and a potential safety issue. Have the brake drums inspected at your earliest convenience to determine if a problem exists and find out what must be done to fix it.

When replacing brake drums keep in mind:

With few exceptions, brake work on one end of an axle should be performed on both ends of the axle. Should a brake drum on one end of a front or rear axle be serviced, or brake shoes on one end are serviced, both sides of the axle should receive the same service. This helps to avoid problems, such as pulling, vibration, and so forth, once the vehicle is returned for use.
Brake drum systems use very powerful springs to keep the brake shoes in position. These springs are exposed to extreme heat. It is best practice to replace all springs whenever new shoes are installed. Should a spring unexpectedly break in the brake drum assembly, a mispositioned brake shoe could cause the brakes to grab and lock, which would pose a safety issue.
If the wheel hub and bearing are integral to the brake drum on your car, the mechanic may recommend replacement of the grease in the wheel bearings and inspection of the wheel bearings.
Since the arc of the brake shoes will not perfectly match with the arc of the drum when new, expect a bed-in period before maximum braking efficiency is achieved.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert Buick mechanics

Real customer reviews from Buick owners like you.

Excellent Rating

(107)

Rating Summary

100

5

1

0

1

100

5

1

0

1

SEE REVIEWS NEAR ME

Jason

20 years of experience

69 reviews

Jason

20 years of experience

by Melvin

Buick Park Avenue V6-3.8L - Oil level is low - Fresno, California

Timely and very good

Jose

10 years of experience

285 reviews

Jose

10 years of experience

by Ricardo

Buick Park Avenue V6-3.8L - Crankshaft Position Sensor Replacement - Saint Petersburg, Florida

He did a great job, was on time, he performed the reparation on time. He had a great attitude.

William

24 years of experience

37 reviews

Request William

William

24 years of experience

Request William

by Barry

Buick Park Avenue V6-3.8L - Radiator Hose Repair - Atlanta, Georgia

We had an appointment on Saturday and he was unreachable--even by yourmechanic. He asked me not to rate based on him missing an appointment, but frankly that is part of your service, making appointments on time. We had to spend more money on transportation than planned because you missed an appointment. He did come on Sunday (the rescheduled appointment was for Tuesday). The service was satisfactory, however he smoked cigarettes the entire time--that seems unprofessional to me. He did not fix both of my hoses (I thought that's what I needed), he did not want to charge me for something that does not need to be done, which I appreciated.

Robert

40 years of experience

37 reviews

Robert

40 years of experience

by kelly

Buick Park Avenue V6-3.8L - Brake Rotor/Disc Replacement (Front) - Scottsdale, Arizona

super nice and knew what he was doing. will use him again. thank you bob.

Excellent Rating

(107)

Rating Summary

100

5

1

0

1

100

5

1

0

1

SEE REVIEWS NEAR ME

Recent articles & questions

How to Keep Your Vehicle Safe From Theft

With With over a million cars stolen each year in the US, vehicle theft has become a concern for vehicle owners. Fortunately, you can increase the chances of keeping your vehicle safe from theft by taking a few simple steps,...

How to Choose a Safe Car

When in the market to buy a new or used car (https://www.yourmechanic.com/article/how-to-buy-a-car), the vast array of brands and models from which to choose can make the process confusing. Of course, there may be a style or some particular features that...

P0828 OBD-II Trouble Code: Up and Down Switch Input Circuit High

P0828 means there is an issue with the input circuit for the up and down switch in the ECM, possibly due to a defective switch or damaged wires.

How do I replace the wiper blades?

Your wipers provide visibility when it’s raining, sleeting or snowing. They’re crucial to safe driving. However, they will wear out over time and you’ll need to replace them before they cause damage to the windshield. Not sure how to do...

Can't open door from outside

Generally, the outer door handle itself is the issue. You will want to get this repaired as soon as possible; if someone hits the child lock switch, you will not be able to open the door at all. You may...

My car shakes violently when the brakes are applied

Hi Grace. Thanks for contacting us tonight. We are a bit confused by the description of your vibration; so let's provide a bit of detail for you. If the shaking occurs when you are fully stopped, then the shaking issue...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com