Buick Lucerne Uneven tire wear Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(181)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(181)

Uneven tire wear Inspection Service

How much does a Uneven tire wear Inspection cost?

On average, the cost for a Buick Lucerne Uneven tire wear Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2010 Buick LucerneV6-3.9LService typeUneven tire wear InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2007 Buick LucerneV6-3.8LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2008 Buick LucerneV8-4.6LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2011 Buick LucerneV8-4.6LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2008 Buick LucerneV6-3.8LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2011 Buick LucerneV6-3.9LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2006 Buick LucerneV6-3.8LService typeUneven tire wear InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2006 Buick LucerneV8-4.6LService typeUneven tire wear InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Buick Lucerne Uneven tire wear Inspection prices

Over time all tires will wear down and need to be replaced. But while this is an eventuality for all vehicles, there are things a driver can do to help increase the life of their tires. Wear patterns on tires can reveal a lot about how the vehicle rides and if any adjustments need to be made. Being able to identify wear on the tires can help you and the mechanic make the appropriate changes.

How this system works:

When you purchase a new or certified used vehicle from a dealership, it should come with four matching tires, each inflated to the correct psi (pounds per square inch). Over time the tread on each tire will begin to wear and need to be changed. When a tire needs to be changed, it is possible that all will need to be changed. Replacing a single tire with a different brand or different size tire may throw off the balance of the vehicle. A mechanic can advise you on when to change your tires and how it should be done.

Common reasons for this to happen:

  • Tire Over/under inflation: Every tire has a recommended psi inscribed on the side of tire, indicating how much air should be put in. Over or under inflating the tire will cause the tire to wear unevenly. An over-inflated tire will wear more quickly around the middle of the tire. An under-inflated tire will wear more quickly on the edges. You mechanic will be able to show you where the recommended psi number is located.

  • Car is out of alignment: New cars are aligned by the manufacturer in a certain way to help maintain efficiency, and increase the life of the tires. In a vehicle that has come out of alignment, the tires are not facing perfectly straight and the vehicle must work harder to travel in a straight line. You can notice if you vehicle is out of alignment if it pulls either left or right, the steering wheel is at an angle while driving straight, and the tires are wearing down unevenly.

  • Tires are not rotated: In vehicles where the engine is at the front, the front tires bear more weight than the ones in the rear. In addition to this weight, they are also responsible for braking and turning. It is recommended that you rotate tires from front to back and side to side to ensure even wear. Tires that have not been rotated will show increased signs of wear at the front tires and decreased wear at the back.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason why your vehicle’s tire have worn unevenly. The mechanic will then provide a detailed inspection report outlining the nature of the tire wear and the cost of any repairs that need to be made.

How it's done:

A mechanic will first inspect the tires to determine the wear and get a better idea of what might have been going wrong. If the mechanic suspects that the tire is under or over inflated, he or she will use a tire pressure gauge to determine the exact pressure inside the tire. The mechanic will then compare that reading to the one on the outside of the tire. Depending on the measurement, the mechanic may have to inflate or let some air out of the tires. Wear in the center of the tire will most likely mean the mechanic will be letting out air, while wear on the edges mean the mechanic will most likely be adding air.

If the mechanic suspects that the vehicle is out of alignment, they will have to adjust suspension components that may have been affected by hitting a pothole or curb. Suspension components may also begin to fail over time, causing the vehicle to come out of alignment. While aligning your vehicle, the mechanic will also see if suspension components need to be replaced. The mechanic will adjust each side of the vehicle so that the tires are flat on the road and not at an angle.

If the wear on the tires is more significant at the front, the tires may need to be rotated. The mechanic will remove each tire and rotate it from front to back and side to side.

In all repairs the mechanic will also check the tread on the tires to make sure that they are still good. Tires that have low tread will not be as effective as new tires. When replacing tires, it is important to have tires of the same brand and size to ensure that they all wear evenly.

How important is this service?

As tire wear becomes worse, they will begin to lose gripping ability and need to be replaced. If you notice that your tires are wearing unevenly, especially in the event of a misalignment, you should have a mechanic look at your vehicle. Paying attention to signs like when the vehicle pulls left or right is an indicator that the vehicle needs to be aligned. Having tire wear examined and corrected can help increase the life of the tire, saving you time and money.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Buick mechanics

Real customer reviews from Buick owners like you.

Excellent Rating

(181)

Rating Summary
174
3
1
1
2
174
3
1
1
2

Bryant

12 years of experience
608 reviews
Bryant
12 years of experience
Buick Lucerne V6-3.8L - Check Engine Light is on - Indianapolis, Indiana
Good job

Gustavo

20 years of experience
75 reviews
Gustavo
20 years of experience
Buick Lucerne V6-3.9L - Car is not starting - San Antonio, Texas
Gustavo is a great mechanic who solved my car issue and explains info very well I would recommend him to anybody that has a car issue

Kevin

6 years of experience
94 reviews
Kevin
6 years of experience
Buick Lucerne V6-3.8L - Oil Change - Clermont, Florida
Level-headed. Knowledgeable. Showed up on-time and at the right location. Had good communication skills and was just generally pleasant to work with. Would recommend him to anyone.

Milton

37 years of experience
239 reviews
Milton
37 years of experience
Buick Lucerne V6-3.9L - Car is not starting - Las Vegas, Nevada
Very good.

Excellent Rating

(181)

Rating Summary
174
3
1
1
2
174
3
1
1
2
Number of Buick Lucerne services completed
1991+
services done by our mechanics
TOTAL NUMBER OF EXPERT Buick MECHANICS
800+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Key Chain
While While not a car part, your key chain can still play a pretty important role to your vehicle. With today’s key chains offering a wide range of features, it’s suddenly more than just a fashion statement. Here are a...
How Long Does a Door Striker Plate Last?
Have Have you ever wondered how your door stays firmly locked with your vehicle kept safe and secure? There are a number of components involved in the vehicle's locking system, one of which is the door striker plate. This part...
P2573 OBD-II Trouble Code: Direct Ozone Reduction Catalyst Sensor Circuit Range/Performance
P2573 code means the sensors do not detect deterioration due to faulty catalyst, oxygen or temperature sensor, or lack of fuel or coolant.

Truck is back-firing.

There are a few possible causes for an engine to backfire (https://www.yourmechanic.com/services/engine-is-backfiring-inspection). Some of the more common causes are a vacuum leak, lean condition caused by a weak fuel pump, an exhaust manifold leak, or a faulty ignition system. With...

I have a 2007 mercury mariner. When up to speed it seems fine. When you go from park to reverse or drive there is a whinny noise a

What you are describing sounds like a dirty or failing idle air control valve. The idle air control valve (https://www.yourmechanic.com/services/idle-control-valve-replacement) monitors the air intake as it is mixed with fuel prior to being injected into the engine at low speeds...

I have an 08 Jeep Grand Cherokee 3.7 V6 that keeps overheating

The most common causes of overheating include low coolant level (including that due to leaks), a faulty thermostat, a plugged radiator, a faulty radiator pressure cap, collapsed hoses, non functioning cooling fans, and a faulty water pump or drive belt....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com