Buick Envista Rear lights are not working Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(2,521)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(2,521)

Rear lights are not working Inspection Service

How much does a Rear lights are not working Inspection cost?

On average, the cost for a Buick Envista Rear lights are not working Inspection is $140 with $0 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2024 Buick EnvistaL3-1.2L TurboService typeRear lights are not working InspectionEstimate$155.00Shop/Dealer Price$158.60 - $161.30
Show example Buick Envista Rear lights are not working Inspection prices

Rear lights or tail lights, are an important safety feature on your vehicle, especially when driving at night or in bad weather. These lights let other drivers know where you are on the road and illuminate brighter to indicate when you are braking. When rear lights fail, not only can it be dangerous for you and other drivers, it can also result in a citation from a police officer. If you notice an issue with your rear lights, you should have it inspected immediately.

How this system works:

During the day time, or when the headlights are off, rear lights only illuminate to indicate when a driver is braking. At night, or when the headlights are turned on, the rear lights illuminate constantly to let other drivers know where you are, and illuminate brighter when braking. Your rear lights are controlled through the same switch that controls the headlights. Power is channeled through a relay to the rear lights, illuminating them when the switch is engaged. A brake light switch, which is typically connected to the brake pedal, illuminates the brighter brake lights when the brake pedal is pressed.

Common reasons for this to happen:

  • Blown Fuse: As a first resort, a mechanic should expect the corresponding fuse for your rear lights. When a fuse blows, it prevents the circuit from completing, in this case preventing the rear lights from illuminating. Sometimes when a taillight lens cracks or breaks, it can allow moisture to enter the lens and cause a short circuit, blowing the fuse.

  • Burned Out Bulbs: In the case where only one of your rear lights appears to be out, the cause is most likely a burned out bulb. When the filament breaks inside a bulb, it cannot illuminate the gas inside the bulb. A burned out bulb will not affect the circuit of the entire rear light system, and the other rear light should continue to function normally.

  • Bad relay: A relay transfers power from the battery to the lights themselves, but when a relay fails, the connection is unable to be completed. A relay may also fail because it is not grounded properly. A wire that is not grounded properly is unable to protect the circuit and provide an outlet for excess charge that build up. A vehicle with a bad relay or bad ground may not be able to successfully power your rear lights.

  • Bad Brake Light Switch: If the rear lights illuminate normally but do not become brighter when braking, the brake light switch may not be functioning properly. The brake light switch circuit is completed when the brake pedal is pushed, but if the switch has been pushed out of place or is not connecting properly, the brake pedal may not be able to complete the circuit, meaning that the lights will not illuminate.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine why your tail lights have failed. The mechanic will then provide a detailed inspection report outlining the nature of the failure and the cost of any repairs that need to be made

How it's done:

When checking electric components on your vehicle, especially, fuses and relays, the mechanic will bring a multimeter which will help him or her diagnose what specific component has failed. The mechanic will begin by examining the back of the car for any superficial damage like broken tail light covers, and loose, or frayed wiring. If there is no superficial damage, the mechanic will then begin to examine the different components along the electrical circuit.

The mechanic will begin inspecting the various electrical components of the vehicle by looking at the fuses. If he or she suspects a blown fuse, they will remove the corresponding fuse for the tail lights to see if it is blown. If so, the mechanic will then replace it with a fuse appropriately rated for the amperage.

If only one of the tail lights appears to be out, the mechanic should check to see if the unlit bulb is burned out. Over time, bulbs will eventually fail and need to be replaced. The mechanic will check the filament in the unlit bulb to see if it is broken. If so, he or she will replace the bad bulb with a new one.

If the bulbs and fuses appear to be working properly, the mechanic will then check the corresponding relay for the tail lights. Using a multimeter, the mechanic can check the resistance of the relay. If it is not functioning properly, the mechanic will replace it and rewire it to the existing connections.

If the tail lights seems to be functioning properly, but the brake lights are not working, the mechanic should inspect the brake light switch. If the brake light switch is not responding to the brake pedal, the mechanic will remove the old switch, replacing it with a new one. The mechanic should then check to make sure that the brake lights are working and responding to the new switch.

In the case of any repair, the mechanic will make sure that he or she completes the necessary repairs and ensure the functionality of your new components. In the event that an issue with the taillights has triggered an error code, the mechanic will use a code reader/scanner to clear the code and its corresponding light.

How important is this service?

Tail and brake lights are designed to help other drivers see you on the road and if they are not working, you may be at an increased risk for an accident. A police officer may also cite you for not having functioning tail lights in the event you are pulled over. If you notice your tail lights have gone out, or are not working properly, you should stop driving the car and have it inspected by a mechanic.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Buick mechanics

Real customer reviews from Buick owners like you.

Excellent Rating

(2,521)

Rating Summary
2,353
98
16
14
40
2,353
98
16
14
40

Eduardo

20 years of experience
570 reviews
Eduardo
20 years of experience
Buick Skylark L4-2.3L - Rear lights are not working Inspection - Pearland, Texas
Showed up a little early and quickly diagnosed the problem. Extremely professional and courteous. Would definitely use again.

Jean

16 years of experience
157 reviews
Jean
16 years of experience
Buick Century V6-3.1L - Ignition Coil - Tampa, Florida
Good Mechanic. Explains issue's well, and will break it down for estimates if you need to do repairs on a low budget over time!

David

33 years of experience
107 reviews
David
33 years of experience
Buick LeSabre V6-3.8L - Brake Master Cylinder - Phoenix, Arizona
What a way to start off my New Year, David was an excellent mechanic. I was going to have my brake master cylinder replaced because the cap was broken and what I thought was irreplaceable. David replaced it and explained to me that I didn't need to replace it because it was operating correctly. I did need brake fluid and when added my brake light went off. I asked him many more questions about my old car and he explained everything and also put this info in the report that was send to me. I have had a lifetime of bad experience with mechanics and that all ended today. I will be using, Your Mechanic again and I hope all the other mechanics you have are as good as David. I would prefer him to do my work but I'm willing to take the chance because of him. I am very happy. Thanks, David. Thumbs up to, Your Mechanic.

Kim

25 years of experience
93 reviews
Kim
25 years of experience
Buick LeSabre V6-3.8L - Oil Change - Durham, North Carolina
I have become spoiled by the professionalism of Kim's work

Excellent Rating

(2,521)

Rating Summary
2,353
98
16
14
40
2,353
98
16
14
40
Number of Buick services completed
27731+
services done by our mechanics
TOTAL NUMBER OF EXPERT Buick MECHANICS
800+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Audi A3 TDI
Consumers Consumers steered clear of hatchbacks for a while but Audi has brought a stylish, functional, high-end option into the arena and buyers have responded. The A3 TDI offers all the versatility and performance you expect from Audi in a...
A Buyer's Guide to the 2012 Cadillac Escalade ESV
When When most people think of the Cadillac Escalade, two words generally come to mind: power and luxury. The 2012 Cadillac Escalade ESV is no different. However, with this model, you can throw in another word: efficient. This hybrid carries...
P2322 OBD-II Trouble Code: Ignition Coil H Primary Control Circuit High
P2322 means there is a fault within the primary or secondary circuit of an ignition coil often due too shorted wires or an corroded oil connector.

Why would my 2003 Chevrolet Impala stall and now it runs rough.

Hello. Though there are a lot of things that can cause this typically it is due to an issue with a failure in a spark plug or an ignition coil failure. If there is not a check engine light on...

catalytic converter going bad does it need to be replaced?

The catalyst should be replaced as soon as possible if it is bad. The backpressure on the engine will cause the engine to run with less power and may overheat the engine valves resulting in engine damage. the catalyst can...

I have a dying key fob on a mini cooper. Will this cause car to struggle to start

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com