Buick Envision Car shuts off when stepping on gas pedal Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(4)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(4)

Car shuts off when stepping on gas pedal Inspection Service

How much does a Car shuts off when stepping on gas pedal Inspection cost?

On average, the cost for a Buick Envision Car shuts off when stepping on gas pedal Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Buick EnvisionL4-2.5LService typeCar shuts off when stepping on gas pedal InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2017 Buick EnvisionL4-2.0L TurboService typeCar shuts off when stepping on gas pedal InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2022 Buick EnvisionL4-2.0L TurboService typeCar shuts off when stepping on gas pedal InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2019 Buick EnvisionL4-2.5LService typeCar shuts off when stepping on gas pedal InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2019 Buick EnvisionL4-2.0L TurboService typeCar shuts off when stepping on gas pedal InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2016 Buick EnvisionL4-2.0L TurboService typeCar shuts off when stepping on gas pedal InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2021 Buick EnvisionL4-2.0L TurboService typeCar shuts off when stepping on gas pedal InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2017 Buick EnvisionL4-2.5LService typeCar shuts off when stepping on gas pedal InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Buick Envision Car shuts off when stepping on gas pedal Inspection prices

Rough idling, frequent stalling, and inconsistent acceleration are all signs that something is amiss with your car. There are a number of systems that can cause this problem. Everything from electrical to fuel delivery to vacuum system issues can all cause a rough-running, stalling vehicle.

Common reasons for this to happen:

Let’s have a look at some of the more common causes that would make your car stall or stumble when you attempt to accelerate.

  • Faulty ignition components: The ignition coil pulls power from the battery and delivers it to the spark plugs, which ignites the fuel and makes the engine run. The car will display a number of symptoms as the ignition system wears.

Misfiring is one of the first symptoms you will see as a symptom of incomplete combustion due to improperly firing ignition components. As the situation progresses you will have trouble starting the vehicle and your fuel economy will drop dramatically. A flashing “Check Engine” light may be associated with this issue.

Finally, as the ignition system reaches the end of its life, your car will misfire and start to stall. Expect the engine to sputter, cough, and jerk, especially at higher speeds. Irregular sparking will cause the car to stall and it may shut off completely when you bring the car to a stop.

  • Faulty fuel pump: The fuel pump moves fuel from the gas tank to the engine. If the fuel pump is malfunctioning, the engine will be getting less fuel than necessary, which will lead to performance issues, and ultimately cause the vehicle not to start.

One of the first signs of a failing fuel pump is hesitation under acceleration. As the problem progresses, the car will lose power when idling, and eventually it may shut down completely.

  • Bad fuel filter: A fuel filter strains the fuel before it reaches the engine, which protects the fuel injectors. They are essential to a well running engine and require regular replacement. If the fuel filter is not replaced at the recommended intervals, the performance and fuel economy of the engine may suffer dramatically.

A failing fuel filter may exhibit similar symptoms to a failing fuel pump. Power loss, especially on acceleration, may be the first sign. As flow continues to be impeded, the fuel filter may ultimately lead to a no-start condition, as fuel can no longer get to the engine.

  • Vacuum leaks: The engine of a car is basically a large air pump. Air is drawn into the cylinders and mixes with fuel that is compressed and ignited. The air is drawn in through a butterfly valve, which creates a vacuum. The vacuum is used to power a number of auxiliary devices.

The tiniest of leaks can cause engine performance problems. Expect a rough or too-fast idle speed. Misfiring or hesitation during acceleration is another common issue with vacuum leaks. As the leak gets worse, the car will begin to stall. A hissing sound and an illuminated “Check Engine” light will typically also be observed.

  • Bad electrical connections: Modern cars have an extensive electrical system, and a bad connection (or bad ground) can cause a number of issues. Dim or flickering lights can be a sign, as well as difficulty starting the car. The car will make a clicking noise, much like a dead battery or loose battery cable.

  • Dirty or defective idle control valve: The idle control valve controls the amount of air that goes into the engine, which allows the computer to maintain the proper engine speed.

When an idle control valve becomes contaminated or stuck, it may lead to an unsteady and rough idle. The car will stall if the valve is too clogged or when it finally fails. If, while holding the accelerator pedal down, a small amount of pressure keeps the car running at a stop, the idle control valve may require attention. In most late model cars, this problem will usually trigger the Check Engine light.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the stalling condition, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

All conditions that cause this type of stalling problem are fairly severe and require maintenance as soon as possible. None of them will get better without a repair and as they grow more severe your car may stop running altogether, which presents a safety issue for you and your passengers. If your car shuts down when you step on the gas pedal, runs rough, or stalls frequently, you should book an appointment for one of our mechanic to look at it immediately.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Buick mechanics

Real customer reviews from Buick owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

James

30 years of experience
877 reviews
James
30 years of experience
Buick Envision L4-2.0L Turbo - Door does not lock or open Inspection - Winter Garden, Florida
Amazing and super friendly. Very knowledgeable and enjoyed his time

Nick

7 years of experience
12 reviews
Nick
7 years of experience
Buick Envision L4-2.5L - Windshield Washer Pump Replacement (Front) - Houston, Texas
Came early, fixed the problem, in and out in a jiffy!

Collins

12 years of experience
493 reviews
Collins
12 years of experience
Buick Envision L4-2.5L - Oil Change - Atlanta, Georgia
Punctual. Collins did a great job! Look forward to booking again.

Alex

20 years of experience
137 reviews
Alex
20 years of experience
Buick Envision L4-2.0L Turbo - Car is not starting - Crest Hill, Illinois
Very professional. In and out. Great job. Thank You

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of Buick Envision services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Buick MECHANICS
800+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Universal Joint (U-joint)
The The universal joint is an important part in your car, and it can be found at the end of the vehicle's propshaft. The universal joint, also called a UJ, makes it possible for your rear axle to safely move...
P000A OBD-II Trouble Code: "A" Camshaft Position Slow Response Bank 1
P000A code definition This code is known as ‘A’ Camshaft Position Slow Response Bank 1. You may also see a 00010 fault...
B1923 OBD-II Trouble Code: Air Bag Memory Clear Circuit Short To Ground
B1923 means there is an issue with the airbag system, likely due to a faulty memory module, bad battery, or defective electrical wiring.

How do I release the foot-operated parking brake?

The release for the foot-operated parking brake is right above the parking brake pedal. The parking brake release is a large handle with a “P” on it. To release the parking brake, pull on the handle until you hear the...

Fault ABS fault traction

I would suggest first checking the ABS sensors (https://www.yourmechanic.com/services/abs-speed-sensor-replacement) at the wheels as they are known for being very sensitive and relaying false readings. Things as simple as dirt and debris can cause these to not work properly. Since these...

When its cold my car door won't shut

Hello. From what you describe it would appear that your door latch mechanism may be getting stuck, perhaps due to the cold weather. You may be able to apply some sort of lubricant to the mechanism that may remedy the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com