BMW X6 Car Battery Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(64)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(64)

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a BMW X6 Car Battery Replacement is $380 with $240 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2010 BMW X6V8-4.4L TurboService typeCar Battery ReplacementEstimate$655.36Shop/Dealer Price$786.75 - $1166.75
2018 BMW X6L6-3.0L TurboService typeCar Battery ReplacementEstimate$646.35Shop/Dealer Price$773.27 - $1149.92
2013 BMW X6L6-3.0L TurboService typeCar Battery ReplacementEstimate$646.35Shop/Dealer Price$774.69 - $1152.40
2011 BMW X6V8-4.4L TurboService typeCar Battery ReplacementEstimate$646.35Shop/Dealer Price$774.69 - $1152.40
2012 BMW X6V8-4.4L TurboService typeCar Battery ReplacementEstimate$646.35Shop/Dealer Price$777.27 - $1156.91
2010 BMW X6L6-3.0L TurboService typeCar Battery ReplacementEstimate$646.35Shop/Dealer Price$774.94 - $1152.83
2012 BMW X6L6-3.0L TurboService typeCar Battery ReplacementEstimate$646.35Shop/Dealer Price$774.72 - $1152.45
2013 BMW X6V8-4.4L TurboService typeCar Battery ReplacementEstimate$646.35Shop/Dealer Price$774.69 - $1152.40
Show example BMW X6 Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

  • Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
  • Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
  • Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

  • A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
  • The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
  • Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
  • The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
  • Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
  • The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

  • The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
  • Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
  • Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
  • Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(64)

Rating Summary
61
2
0
0
1
61
2
0
0
1

Brian

25 years of experience
240 reviews
Brian
25 years of experience
BMW X6 L6-3.0L Turbo - Car Battery Replacement - Frederick, Maryland
Fast, proffesional, wouldn’t hesitate to use again. .

Jesus

8 years of experience
33 reviews
Jesus
8 years of experience
BMW X6 V8-4.4L Turbo - Car Battery Replacement - National City, California
Arrived on time, was very courteous. Answered all my questions. Will definitely request him in the future. Thank you Jesus.

David

16 years of experience
93 reviews
David
16 years of experience
BMW X6 L6-3.0L Turbo - Oil Change - Oakley, California
On time, professional and courteous.

Jason

16 years of experience
344 reviews
Jason
16 years of experience
BMW X6 L6-3.0L Turbo - Pre-purchase Car Inspection - Bayonne, New Jersey
Very kind and professional. Provided clear report and recommendations.

Excellent Rating

(64)

Rating Summary
61
2
0
0
1
61
2
0
0
1
Number of BMW X6 services completed
704+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1200+
experts on our platform

Recent articles & questions

How to Replace a Proportioning Valve
The brakes on the rear wheels may lock up when the brake is applied especially when surfaces are wet if the proportioning valve is failing.
How Long Does a Wheel Speed Sensor Last?
With With all of the sensors and switches that a card has, it can be very overwhelming when trying to keep up with them all. For the most part, a person will become quite familiar with the way that their...
How Traffic Jams Start
It’s It’s a Friday afternoon and you decide to cut out of work early to get a head start on the weekend. As you hit the highway, you notice that traffic is moving along really well. With any luck, you’ll...

Rumbling sound from the exhaust

The AC could have a leaking compressor or condenser, and would need to be checked and tested for the failure. The exhaust rumbling may be the exhaust pipe rusted through. This is common on some of these cars, and would...

How to clean out a gas tank that has been sitting for 10+ years.

Hi there, thanks for writing in. I've always found that the best way to clean a fuel cell, whether it's diesel or gasoline, is to remove it from the vehicle and flush it with a lot of solvent. The problem...

My 95 Jeep Grand Cherokee shakes when you just sit. Drives great but done know what's wrong any help would be appreciated

Vibration at idle is due to either faulty motor mounts or an engine management issue such as faults in the ignition or fuel system, although on high mileage engines uneven cylinder compression can be a cause. You note loss of...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com