BMW 340i xDrive Car is not getting enough power Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(6,667)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(6,667)

Car is not getting enough power Inspection Service

How much does a Car is not getting enough power Inspection cost?

On average, the cost for a BMW 340i xDrive Car is not getting enough power Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2016 BMW 340i xDriveL6-3.0L TurboService typeCar is not getting enough power InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
2018 BMW 340i xDriveL6-3.0L TurboService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2017 BMW 340i xDriveL6-3.0L TurboService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
Show example BMW 340i xDrive Car is not getting enough power Inspection prices

When a vehicle seems to lose power, or is not getting enough power when you stomp down on the gas pedal it is not only annoying, it can be dangerous. Pulling out onto a highway or across a busy intersection, only to have the vehicle hesitate or stall can lead to a perilous situation.

In most cases a lack of power can be traced back to a fuel system malfunction. Issues can range from a leaking fuel line to a bad fuel pump. Regardless of the cause, an engine that is not getting enough power should be serviced immediately.

How this system works:

The fuel system supplies fuel to the engine. The combustion chamber is where fuel is mixed with air, atomized and then ignited. Fuel systems vary depending on the vehicle but they all have the same basic components.

Fuel is stored in the gas tank and a fuel pump pushes fuel through the fuel lines to a fuel filter and then into the fuel injectors. On older vehicles the fuel is delivered to the carburetor and throttle body injection system. The fuel injectors spray fuel into the cylinder where it mixes with air and ignites during compression. The resulting explosion drives the pistons.

Common reasons for this to happen:

  • Defective Fuel Pump or Filter: The fuel pump supplies the engine with fuel and if it malfunctioning the car will experience a loss of power. Over time fuel pumps can wear out or become clogged with contaminants, which prevents it from pushing fuel to the injectors. This can cause the vehicle to sputter at high speeds, stall, or hesitate during acceleration. A clogged fuel filter can also cause these problems. Fuel filters should be changed on a regular schedule.

  • Clogged or Bad Fuel Injector: Like a fuel pump, injectors can become clogged due to fuel contaminates, hydrocarbons and additives. A clogged injector will degrade performance and the engine will feel like it is not getting enough power. It can also make the vehicle hard to start, idle roughly and effect fuel consumption.

  • Leaking Fuel Line: A leaking fuel line will not provide enough fuel to the injectors, which can result in a lack of power. If there is a strong smell of fuel in the cabin of the car or a puddle of fuel underneath the vehicle a fuel line issue is usually the problem. This should be addressed immediately.

  • Vacuum Leak: A vacuum leak can affect the computers ability to properly regulate the fuel to air ratio, which can cause a lack of power. In most cases, a vacuum leak will trigger the Check Engine light to come on.

  • Dirty Airflow Sensor: An airflow sensor detects the mass of air that is entering the fuel injection system and passes that information to the engine’s computer so it can correctly deliver the right amount of fuel. A failing or dirty airflow sensor will send the wrong signals to the computer. A lack of power during acceleration is a common symptom. This problem will also trigger a Check Engine light.

Clogged Catalytic Converter: If your catalytic convertor is clogged or starting to fail it can prevent the proper flow of air through the engine. This can lead to a loss of power. The vehicle will also run hotter than usual.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the lack of power, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A vehicle that is not getting enough power should be inspected as soon as possible. It can be dangerous to drive, and fuel system problems that are not fixed can often lead to more expensive repairs as more components are affected.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(6,667)

Rating Summary
6,214
206
60
44
143
6,214
206
60
44
143

Andrian

32 years of experience
185 reviews
Andrian
32 years of experience
BMW 340i xDrive L6-3.0L Turbo - Pre-purchase Car Inspection - Pompano Beach, Florida
Thanks for your help Adrian!

Jay

37 years of experience
956 reviews
Jay
37 years of experience
BMW 528i L6-2.8L - Car AC Repair - Riverside, California

Chris

11 years of experience
82 reviews
Chris
11 years of experience
BMW 328i xDrive L6-3.0L - Pre-purchase Car Inspection - Linden, New Jersey
Extremely attentive to detail! HIGHLY recommend. I am ordering another pre-inspection right now!

Jay

37 years of experience
956 reviews
Jay
37 years of experience
BMW X3 L6-3.0L - Oil/Fluid Leak - Moreno Valley, California
Jay was professional, arrived timely and fair. Will request him for my car repairs in the future.

Excellent Rating

(6,667)

Rating Summary
6,214
206
60
44
143
6,214
206
60
44
143
Number of BMW services completed
73337+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1100+
experts on our platform

Recent articles & questions

The Top 5 Selling Cars in Arizona in 2012
Depending Depending on where you live in Arizona, the weather is either arid or there may be periods of heavy snow – such as in the mountain areas. The vehicles that have been popular in previous years for the area,...
P0329 OBD-II Trouble Code: Knock Sensor 1 Circuit Input Intermittent (Bank 1 or Single Sensor)
P0329 P0329 code definition? Knock Sensor 1 Circuit Input Intermittent (Bank 1 or Single Sensor) What the P0329 code means A knock sensor is used to optimize engine performance. It also helps protect the engine against potentially dangerous and power...
Why Brake Caliper Replacements Can Be Tricky
Changing a brake caliper in the front or rear of a car can pose some challenges, as the proper tools and equipment are essential to perform the job.

After part replacements, spark plugs do not work - 1996 Lexus LX450

If you have a Check Engine Light (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection) on, first check for those codes to determine what engine management thinks is going on. If no trouble code, check the ignition fuse behind the driver side kick panel (carpeted panel at...

My car goes into limp mode.

Hi there. The code C1130 (http://www.autocodes.com/c1130_nissan.html) that was cleared was either for the ECM (computer to the vehicle) or the ABS controller unit having a fault. The code p0101 (https://www.yourmechanic.com/article/-p0101-obd-ii-trouble-code-mass-airflow-maf-circuit-operating-range-or-performance-problem-by-john-nelson) if for the mass air flow sensor (MAF) is reoccurring...

When I brake it shouldn't like a popping noise or cracking in the front , I know I need new brake pads and routers which I am gett

Claimed by Jay Safford

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com