Audi S7 Mass Airflow Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5)

Mass Airflow Sensor Replacement Service

How much does a Mass Airflow Sensor Replacement cost?

On average, the cost for a Audi S7 Mass Airflow Sensor Replacement is $388 with $293 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Audi S7V8-4.0L TurboService typeMass Airflow Sensor ReplacementEstimate$700.83Shop/Dealer Price$857.29 - $1304.17
2017 Audi S7V8-4.0L TurboService typeMass Airflow Sensor ReplacementEstimate$726.17Shop/Dealer Price$893.98 - $1374.88
2013 Audi S7V8-4.0L TurboService typeMass Airflow Sensor ReplacementEstimate$726.17Shop/Dealer Price$909.01 - $1401.18
2014 Audi S7V8-4.0L TurboService typeMass Airflow Sensor ReplacementEstimate$726.17Shop/Dealer Price$908.95 - $1401.08
2015 Audi S7V8-4.0L TurboService typeMass Airflow Sensor ReplacementEstimate$726.17Shop/Dealer Price$909.05 - $1401.25
2016 Audi S7V8-4.0L TurboService typeMass Airflow Sensor ReplacementEstimate$726.17Shop/Dealer Price$909.01 - $1401.18
Show example Audi S7 Mass Airflow Sensor Replacement prices

What is the Mass Airflow Sensor all about?

The mass airflow sensor is a round tunnel made of plastic with a sensor attached inside. All cars take air from the outside and pass it into the engine through the air filter. The mass airflow sensor measures the amount of air entering the engine. For an engine to perform properly, it needs a specific amount of air-fuel mixture. The computer in the car reads the amount of air coming into the engine from the mass airflow sensor and then calculates the correct amount of fuel needed for proper engine performance. If the sensor goes bad, the engine will not know the right amount of fuel to add, causing problems including poor gas mileage, lack of power and more.

It is common for the mass airflow sensor to get dirty (if the air filter is dirty) and lose the ability to read the amount of air coming in the engine. If the vacuum hoses are leaking, it will give the same error code as mass airflow sensor failure.

When doing this job, the mechanic may recommend changing the electrical connector that connects the mass airflow sensor to the car's computer system. It is possible for the wires in the connector to break, causing the mass airflow sensor to not work.

Keep in mind:

  • Routinely changing your air filter can improve the lifespan of your mass airflow sensor
  • Often mass airflow sensors stop working because of bad connectors or wiring harnesses.
  • Anytime the mass airflow sensor is replaced, the air duct between the sensor and the intake manifold should be inspected.

How it's done:

  • Scan the computer in the car for codes.
  • Verify the problem.
  • Remove and replace the sensor if found faulty.
  • Check vacuum hoses for leaks and cracks.
  • Test drive the vehicle.

Our recommendation:

  • Changing the air filter on a regular basis will ensure that the car is getting cleaner air and hence performing optimally.
  • If the Check Engine light is on, get the car inspected as soon as you can.
  • If the Check Engine light is flashing, pull over and get the car towed to avoid costly repairs.
  • A mechanic should always inspect the vacuum hoses and snorkel attached to the mass airflow sensor when replacing it. It is possible for these items to have leaks. Replacing the sensor without fixing the leaks will not solve the problem.

What common symptoms indicate you may need to replace the Mass Airflow Sensor?

  • Check Engine light is on.
  • Car does not have power.
  • Excessive fuel consumption.
  • Car may not start.

How important is this service?

In order to run optimally, your vehicle needs to have a perfect fuel-to-air ratio. As the vehicle is moving, an uncontrollable amount of air enters the throttle body and heads into the intake manifold. As such, the fuel has to be adjusted to be optimal for the amount of air. The mass airflow sensor measures the mass of the air that is entering the vehicle, and sends the information to the car’s computer management system. This system then controls the amount of fuel that is injected into the cylinders, so that the ideal fuel-to-air ratio is achieved. When the mass airflow sensor stops working, the computer cannot receive information on the air intake, and the fuel-to-air ratio will be wrong. This will cause your engine to run poorly, and sometimes not at all. It will also impact your gas mileage.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0

Leslie

14 years of experience
81 reviews
Leslie
14 years of experience
Audi S7 V8-4.0L Turbo - Pre-purchase Car Inspection - Newtown Square, Pennsylvania
Leslie did a pre-purchase car inspection for me and I was very happy with his communication and the report. He arrived early and promptly called me once the inspection was done to let me know the results.

Nazareth

27 years of experience
285 reviews
Nazareth
27 years of experience
Audi S7 V8-4.0L Turbo - Battery - El Monte, California
Excellent and very professional. Highly recommended!!! Took care of my Audi S7 and solved my problem with the car.

Engel

23 years of experience
5 reviews
Engel
23 years of experience
Audi S7 V8-4.0L Turbo - Pre-purchase Car Inspection - Arlington, Virginia
Fully explained what he saw of the car in PPI and made me feel confident in the health of the vehicle. Responded in timely manner when I messaged him. Great experience all around.

Christopher

10 years of experience
116 reviews
Christopher
10 years of experience
Audi S7 V8-4.0L Turbo - Brake Rotor/Disc Replacement (Front) - Katy, Texas
Friendly and timely.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0
Number of Audi S7 services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

What Happens to Sensors if They are Dirty?
Car sensors can get dirty with normal use. Symptoms of dirty sensors include reduced engine power, worse gas mileage, or an engine that hesitates.
How Long Does an Ambient Temperature Sensor (Switch) Last?
In In many late-model vehicles, the need to manually adjust heat and air conditioning has been eliminated. You can actually set your car’s computer to regulate the cooling and heating process based on the temperature at which you feel most...
How to Replace the Oil Temperature Sensor on Most Cars
Oil, as well as the oil temperature sensor, is crucial to the engine lubrication system. A bad sensor can lead to leaks and poor vehicle performance.

Plug from camshaft position sensor corroded.

Even though you can get the car to start and run by sticking the wires into the connector, it will not keep out moisture and it could corrode even more. I would recommend having a mechanic inspect the sensor and...

Speedometer stopped working

The vehicle speed sensor signal can be tested using a scanner since the signal will go to the engine control module and the speedometer. If the signal is good to the ECM, then you most likely have a bad speedometer....

ABS light error codes

Hello. The ABS fuse will be located in the central junction box inside of the engine bay of your 2005 Ford E-250. It is likely that you have a short somewhere that is causing fuses to blow (https://www.yourmechanic.com/services/fuse-replacement) or interrupting...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com