Audi allroad Car is slow to accelerate Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(10)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(10)

Car is slow to accelerate Inspection Service

How much does a Car is slow to accelerate Inspection cost?

On average, the cost for a Audi allroad Car is slow to accelerate Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2013 Audi allroadL4-2.0L TurboService typeCar is slow to accelerate InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
2014 Audi allroadL4-2.0L TurboService typeCar is slow to accelerate InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2015 Audi allroadL4-2.0L TurboService typeCar is slow to accelerate InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2016 Audi allroadL4-2.0L TurboService typeCar is slow to accelerate InspectionEstimate$94.99Shop/Dealer Price$112.48 - $125.60
Show example Audi allroad Car is slow to accelerate Inspection prices

A car that is getting fuel and is properly tuned should take off quickly when the accelerator is pressed. A vehicle that is sluggish or slow to accelerate can be dangerous, especially at intersections and on-ramps.

Modern cars have a very complex system that delivers fuel to the engine and rids of the vehicle of exhaust gases. A failure in any part of this system can lead to a car that is slow to accelerate. In the majority of cases, the problem can be traced back to the fuel system.

A vehicle that is slow to accelerate should be repaired immediately as it can be dangerous to drive.

How this system works:

The fuel system is responsible for supplying fuel to the engine. Fuel is mixed with air, atomized and vaporized in the intake system, which provides power to drive the pistons of the engine. There are a variety of different fuel system types but most of them have the same basic parts.

The fuel tank stores the gasoline. Fuel is pulled through the fuel lines by the fuel pump and is fed into the fuel injectors. Older cars have a carburetor and throttle body injectors instead of fuel injectors. The fuel injectors spray gasoline into the cylinders where it is mixed with air and then ignites during the compression stage. The result is an explosion that moves the pistons.

Common reasons for this to happen:

  • Bad or Clogged Fuel Injector: Fuel injectors can become clogged due to contaminates in the fuel. Fuel injectors, by their very nature, must be very precise in controlling the amount of fuel that goes into the combustion chamber so they have very small passages that deliver the fuel. Over time these tiny passages will become clogged which impedes the delivery of fuel.

When an injector is clogged it can degrade the performance of the vehicle and the car may accelerate slowly or feel that it does not have enough power. Other symptoms include a rough idle, a vehicle that is hard to start and a decrease in fuel efficiency.

  • Defective Fuel Pump: The fuel pump pulls the fuel from the gas tank to the engine via the fuel lines. If the pump stops working, malfunctions, or becomes clogged, it will not supply enough fuel to the injectors. This can cause the vehicle to accelerate slowly, or even sputter and stall, especially at high speeds.

  • Clogged Fuel Filter: The job of the fuel filter is to filter out containments in the fuel and if it becomes clogged it can restrict the amount of fuel that reaches the injectors. This can cause a vehicle to accelerate slowly. Fuel filters are designed to be replaced on a regular basis.

  • Dirty Airflow Sensor: This part detects the mass of air that enters the fuel injection system and hands that information off to the engines’ computer which allows the computer to deliver the proper amount of fuel to the air. These sensors can become dirty or malfunction over time, which results in the wrong data being sent to the computer. A slow accelerating car is the result of this incorrect data. It may also trigger the Check Engine light.

  • Leaking Fuel Line: A leak in the fuel line will drain off enough fuel that it leaves a shortage for the injectors. This not only affects the performance of the car but will also create a dangerous situation. If you smell gasoline in the vicinity of the car or see a puddle of fuel underneath the vehicle, the car should be inspected and repaired immediately.

  • Vacuum Leak: A leak in the vacuum system can affect the ability of the car’s computer system to properly regulate the fuel to air ratio. One of the major symptoms of a vacuum leak is a car that is slow to accelerate or feels like it has a lack of power. In addition the check engine light will probably illuminate.

  • Failing Catalytic Converter: A failing or clogged catalytic converter will prevent the proper amount of air from going into the engine. In most cases the vehicle will run hotter than normal, will accelerate slowly and feel like there is a loss of power. Issues with the catalytic converter tend to be fairly expensive repairs.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the car is slow to accelerate issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will check your car's fuel system for leaks and any defective parts. This includes fuel injectors, fuel pump, fuel filter, airflow sensors and other important components related to the vehicle's slow acceleration. It may be necessary to test drive the car in order to verify the acceleration issue and provide an accurate diagnosis.

How important is this service?

A car that accelerates slowly is a dangerous vehicle to drive, especially at intersections and on ramps. Failing to fix simple fuel system problems will often lead to a more expensive repair down the road and eventually a car that may not run at all. A slow accelerating car should be inspected and repaired as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(10)

Rating Summary
10
0
0
0
0
10
0
0
0
0

Ruben

14 years of experience
86 reviews
Ruben
14 years of experience
Audi allroad L4-2.0L Turbo - Brake Rotor/Disc Replacement (Front) - Los Angeles, California
Best Mechanic and repair experience that I have ever had! Thank you Ruben!

Miguel

21 years of experience
232 reviews
Miguel
21 years of experience
Audi allroad L4-2.0L Turbo - Brake Pads Replacement (Front) - Fair Lawn, New Jersey
Miguel is very professional mechanic. He called me in advance about his coming. He brought the quality parts (brakes pads and rotors) and done his job quickly and of great quality. I tested the brakes after the replacement and they were efficient and very silent. I would recommend him very much.

Corey

16 years of experience
11 reviews
Corey
16 years of experience
Audi allroad L4-2.0L Turbo - Brake System Flush - Portland, Oregon
Great experience, arrived in time and completed the job with care and attention to detail. Highly recommended

Damian

11 years of experience
465 reviews
Damian
11 years of experience
Audi allroad L4-2.0L Turbo - Brake Pads Replacement (Front, Rear) - Hyattsville, Maryland
Damiam was an exceptional mechanic. He was assigned to me the last minute because the first mechanic never showed up. I was very very pleased with the job he did on my car. Wouldn't hesitate to recommend him to my family and peers. Thank you Damian. God bless you.

Excellent Rating

(10)

Rating Summary
10
0
0
0
0
10
0
0
0
0
Number of Audi allroad services completed
110+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

How to Flush Your Cooling System
Flushing Flushing the cooling system (https://www.yourmechanic.com/article/what-does-it-mean-to-flush-fluids-in-a-car) is part of every vehicle's scheduled maintenance. This procedure is usually required every two to four years, depending on the vehicle. It is important to perform this maintenance at its scheduled time because the...
Disabled Driving Laws and Permits in Kentucky
Disabled Disabled driver laws change from one state to another. It is important that you know the laws not only for the state that you live in, but also for states in which you might be visiting or traveling through....
How to Silence Car Exhaust
Exhaust systems get rid of harmful gases as you drive your car. Car exhausts make noise when there are cracks or leaks in the car exhaust.

Jerking while shifting from second gear into third gear

This issue could be something as simple as a reprogramming of the transmission computer, to a broken motor mount (https://www.yourmechanic.com/article/how-long-do-engine-motor-mounts-last) (although the jerking would probably be felt in all gear ranges), to possibly a transmission malfunction. Unfortunately, the transmission module...

Electric power steering rack 2012 Ford Focus

Hi there - the electrically-assisted steering rack (https://www.yourmechanic.com/article/how-do-modern-cars-steer) does have a software component that must be loaded, and sync'd with the rest of the car. This will require a visit to your Ford dealer, or Ford service center with this...

Shifting problem

What you are describing may be a result of a faulty speed sensor, potentially low transmission fluid (https://www.yourmechanic.com/services/transmission-fluid-service) or a even a faulty transmission control solenoid. As your vehicle travels down the road, the computer analyzes data being sent by...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com