Audi A7 Quattro Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(49)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(49)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Audi A7 Quattro Power Steering Pressure Hose Replacement is $538 with $356 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2014 Audi A7 QuattroV6-3.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$988.56Shop/Dealer Price$1193.52 - $1789.95
2017 Audi A7 QuattroV6-3.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$976.85Shop/Dealer Price$1176.00 - $1768.08
2018 Audi A7 QuattroV6-3.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$981.77Shop/Dealer Price$1182.18 - $1777.98
2016 Audi A7 QuattroV6-3.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$976.85Shop/Dealer Price$1177.84 - $1771.30
2015 Audi A7 QuattroV6-3.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$976.85Shop/Dealer Price$1181.19 - $1777.17
2013 Audi A7 QuattroV6-3.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$976.85Shop/Dealer Price$1178.16 - $1771.86
2012 Audi A7 QuattroV6-3.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$900.93Shop/Dealer Price$1082.97 - $1619.53
Show example Audi A7 Quattro Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(49)

Rating Summary
47
2
0
0
0
47
2
0
0
0

Joe

16 years of experience
453 reviews
Joe
16 years of experience
Audi A7 Quattro V6-3.0L Turbo - Car is overheating - Madison, Tennessee
straight forward, honest, and polite

Rigoberto

12 years of experience
739 reviews
Rigoberto
12 years of experience
Audi A7 Quattro V6-3.0L Turbo - Pre-purchase Car Inspection - Buffalo Grove, Illinois
Rigoberto was very thorough, very professional, friendly, knowledgable and answered all my questions. I would definitely work with him again and recommend him to others!

Jermaine

25 years of experience
382 reviews
Jermaine
25 years of experience
Audi A7 Quattro V6-3.0L Turbo - Brake Pads Replacement (Rear) - Chevy Chase, Maryland
Great work. Quick. Smart

Joseph

19 years of experience
115 reviews
Joseph
19 years of experience
Audi A7 Quattro V6-3.0L Turbo - Brake Pads Replacement (Front) - Pikesville, Maryland
Great Mechanic was able to change the front and rear break pads on my 2012 Audi A7.

Excellent Rating

(49)

Rating Summary
47
2
0
0
0
47
2
0
0
0
Number of Audi A7 Quattro services completed
539+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
800+
experts on our platform

Recent articles & questions

What Does the Trailer Tow Hitch Warning Light Mean?
The trailer tow hitch light is designed to warn you when there is an issue with your car's tow hitch, possibly that it is unlocked.
How Long Does a Catalytic Converter Last?
The catalytic converter converts pollutants in the exhaust system into less toxic pollutants by using a redox reduction method. The catalytic converter...
2012 Toyota Highlander vs. 2012 Dodge Durango: Which One Should I Buy?
Sport Utility Vehicles (SUVs) are a fun class of vehicle: not only are they great for carpools and moving around friends and family, but you can also get them off-road and just get dirty and have fun with them. These...

Seat belt won't work on rear driver's side.

If the seat belt will pull all the way out but simply not fasten to the latch, the latch has been compromised. Removal of the rear seat will be required and a new latch from the manufacturer installed. I would...

Over heating but water is flowing through radiator

Hi there, there are a number of things that can cause a vehicle to overheat. The water flowing through the radiator can be a little misleading. Here is a list of possible causes: Thermostat (https://www.yourmechanic.com/services/thermostat-replacement) Water pump (https://www.yourmechanic.com/services/water-pump-replacement) Clogged radiator...

Fixed crank shaft position sensor and engine light still on 2001 BMW 325i

Hi there - there are a couple of possibilities. First off, the new crankshaft position sensor (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-crankshaft-position-sensor) (CPS) could be faulty - not all replacement parts are reliable. Second - there could be a problem with the wiring for the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com