Audi 90 Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(2,694)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(2,694)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a Audi 90 Front Crankshaft Seal Replacement is $633 with $269 for parts and $364 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Audi 90L5-2.3LService typeFront Crankshaft Seal ReplacementEstimate$1843.20Shop/Dealer Price$2209.90 - $3268.87
1991 Audi 90L5-2.3LService typeFront Crankshaft Seal ReplacementEstimate$1817.07Shop/Dealer Price$2174.80 - $3227.06
1994 Audi 90V6-2.8LService typeFront Crankshaft Seal ReplacementEstimate$1466.41Shop/Dealer Price$1733.28 - $2511.93
1993 Audi 90V6-2.8LService typeFront Crankshaft Seal ReplacementEstimate$1466.41Shop/Dealer Price$1733.27 - $2511.92
1995 Audi 90V6-2.8LService typeFront Crankshaft Seal ReplacementEstimate$1456.81Shop/Dealer Price$1729.01 - $2506.26
Show example Audi 90 Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(2,694)

Rating Summary
2,506
93
20
13
62
2,506
93
20
13
62

Ben

42 years of experience
1589 reviews
Ben
42 years of experience
Audi A8 Quattro V8-4.2L - Front Crankshaft Seal - Houston, Texas
Excellent experience

Alexis

31 years of experience
94 reviews
Alexis
31 years of experience
Audi A7 Quattro V6-3.0L Turbo - Oil Change - Hialeah, Florida
Excellent! Very professional. Everything was done as needed. Very easy and pleasant experience.

Alexander

21 years of experience
113 reviews
Alexander
21 years of experience
Audi A4 L4-2.0L Turbo - Starter - Orlando, Florida
Alexander replaced the starter in my car. He did a great job and he is very friendly. I definitely recommend him!

Joshua

28 years of experience
709 reviews
Joshua
28 years of experience
Audi A4 L4-1.8L Turbo - Coolant Reservoir - San Ramon, California
Very knowledgeable, helpful and bang on the money. Recommendations are realistic and work is top class

Excellent Rating

(2,694)

Rating Summary
2,506
93
20
13
62
2,506
93
20
13
62
Number of Audi services completed
29634+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
800+
experts on our platform

Recent articles & questions

P2192 OBD-II Trouble Code: System Too Rich at Higher Load Bank 1
P2192 P2192 code definition System Too Rich at Higher Load Bank 1 What the P2192 code means This code indicates there is a rich condition in the exhaust under high load conditions. High load conditions exist when a vehicle is...
How to Choose a Jeep Grand Wagoneer
Due Due to a recent surge in popularity, the Jeep Grand Wagoneer is making a comeback. Since the vehicle was manufactured only throughout the sixties, seventies, eighties, and the early nineties, most Jeep Grand Wagoneers are no longer on the...
How to Renew Your Car Registration in Kansas
Driving Driving on the roadways of Kansas is something that residents of this great state do on a daily basis. For the privilege of driving on these roadways, a resident will have to pay their fair share of taxes. Among...

Grinding noise when ABS engages brakes

The most likely cause of this issue would be a failed hub assembly (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-wheel-hub-assembly) or failed wheel speed sensor (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-wheel-speed-sensor). The grinding sound you hear could possibly be a dry spot in your wheel bearing, or just the buzz that...

clicking popping sound when turning sharp left

Hello there. Is your Jeep four-wheel-drive? A clicking or popping noise can come from a CV joint with a torn grease boot. The boot (https://www.yourmechanic.com/services/cv-boot-replacement) develops a tear or leak and the grease will leak over time until the joint...

Need to know if it's the engine. Misfiring, horrible gas mileage

Hi there, thanks for writing in. There are a few items in your question that lead me to believe you've got a cooling system problem that should be diagnosed and repaired as soon as possible. First, if you're smelling liquid...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com