Audi 80 Quattro Engine is sputtering Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(2,467)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(2,467)

Engine is sputtering Inspection Service

How much does a Engine is sputtering Inspection cost?

On average, the cost for a Audi 80 Quattro Engine is sputtering Inspection is $105 with $0 for parts and $105 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Audi 80 QuattroL5-2.3LService typeEngine is sputtering InspectionEstimate$124.99Shop/Dealer Price$139.69 - $150.72
1992 Audi 80 QuattroL5-2.3LService typeEngine is sputtering InspectionEstimate$104.99Shop/Dealer Price$119.72 - $130.77
1988 Audi 80 QuattroL5-2.3LService typeEngine is sputtering InspectionEstimate$104.99Shop/Dealer Price$119.72 - $130.77
1989 Audi 80 QuattroL5-2.3LService typeEngine is sputtering InspectionEstimate$104.99Shop/Dealer Price$119.68 - $130.70
1991 Audi 80 QuattroL5-2.3LService typeEngine is sputtering InspectionEstimate$104.99Shop/Dealer Price$119.75 - $130.82
Show example Audi 80 Quattro Engine is sputtering Inspection prices

In almost all cases, a sputtering engine is trying to tell you that there is a deeper problem that requires immediate attention. An engine running out of gas will definitely sputter but if the gas gauge indicates full, the problem lies deeper inside the engine compartment.

An incomplete combustion in the engine will cause a sputter as can the ignition system. The fuel system, such as a blocked fuel injector may also cause the vehicle to sputter. While a sputtering engine may not seem like a major issue, it is a symptom of a bigger problem that will not self-correct and will eventually result in a much more expensive repair. The source of the sputter should be investigated and repaired as soon as possible.

How this system works:

A sputtering engine can have its root cause located in a number of different systems. Here are two of the more common ones, the exhaust and fuel system.

The exhaust system collects exhaust gases from the cylinder head via the exhaust manifold, which acts as a funnel diverting exhaust gases away from the cylinders. The gases are then released through the front pipe where they travel to the catalytic converter. The catalytic converter removes the harmful elements of the gases such as carbon monoxide and hydrogen monoxide, converting them into inert gases.

The gases exit the catalytic converter into the muffler, which reduces the noise levels of the engine, and finally the exhaust fumes exit the vehicle at the tail pipe.

The fuel system is responsible for storing and supplying fuel to the car to drive the engine. Fuel is mixed with air, atomized and vaporized. This happens in the engine intake system. This mixture is then compressed in the engine cylinder and then ignited which produces the energy which moves the pistons.

Common reasons for this to happen:

  • Leak in Exhaust Manifold: A leak in the exhaust manifold, which collects exhaust gases, can cause the engine to sputter or run unevenly. This condition can also cause the Check Engine light to trigger as well as present increased engine noise and poor performance from the engine. A cracked or leaking exhaust manifold can create dangerous driving condition as the escaping hot gases can melt nearby plastic components. It can also lead to exhaust fumes making their way into the car cabin.

  • Worn Seals or Gaskets: There are a number of gaskets and seals in the exhaust system and if any of them are failing it can create a rough or sputtering engine. Gaskets and seals wear down over time and will eventually have to be replaced. Failing to do this in a timely manner can damage the exhaust manifold which is a much more expensive repair.

  • Failing Catalytic Converter: If the engine is sputtering, running rough and has a smell of rotten eggs it is probably due to a failing catalytic converter. In most cases, the Check Engine light will trigger as well. When a converter starts to fail, it isn’t able to burn off the hydrocarbons in the exhaust, and is no longer breaking down the sulfur created by the engine. This leads to the strong rotten egg smell. Eventually the car will not start at all as the catalytic converter becomes totally blocked.

  • Malfunctioning Oxygen Sensors: Oxygen sensors measure how rich or lean the exhaust gases are when they leave the vehicles combustion chamber. The vehicle computer uses this information to adjust the amount of fuel entering the engine. A dirty or failing sensor puts too much or too little fuel into the engine causing it to run rough or sputter. Oxygen sensors must be replaced on a regular basis.

  • Dirty Fuel Injectors: Fuel injectors spray fuel into the cylinders. It is then mixed with air and ignited. Fuel injector nozzles can become clogged over time, which can lead to a sputtering engine, slow acceleration and the car not having enough power. Fuel injectors can be cleaned if the problem is caught early, but as the conditions worsens, the injectors may have to be replaced.

  • Bad or Dirty Spark Plugs: Spark plugs are responsible for igniting the fuel in the combustion chamber. If they are not working correctly or are dirty they don’t ignite the fuel cleanly and the car can misfire or sputter. The plugs will need to be replaced or cleaned.

  • Dirty Mass Airflow Sensor: The mass airflow sensor measures the amount of air that is entering the fuel injection system. It sends that information to the vehicle computer, which then delivers the proper amount of fuel to the combustion chamber. A dirty mass airflow sensor will send the wrong information the computer resulting in a rough running or sputtering engine.

  • Vacuum Leak: A leak in the vacuum system can lead to a sputtering or rough running engine. As the problem progresses the vehicle can hesitate or stall when accelerating.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the engine is sputtering issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

A mechanic will inspect your car's exhaust system and other important components of your vehicle. This includes the exhaust manifold, exhaust seals and gaskets, oxygen sensors, airflow sensors and more. It may be necessary for the mechanic to crank up your car to diagnose your engine's sputtering.

How important is this service?

In almost all cases, a sputter engine is a symptom of a more serious issue lurking below the surface. If the problem is not diagnosed and repaired in a timely manner the vehicle will likely start to stall, become hard to start and eventually stop running altogether.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(2,467)

Rating Summary
2,288
87
19
12
61
2,288
87
19
12
61

Mark

11 years of experience
349 reviews
Mark
11 years of experience
Audi A6 Quattro V6-2.7L Turbo - Window fell inside the door - San Jose, California

Dellano

18 years of experience
520 reviews
Dellano
18 years of experience
Audi A3 L4-2.0L Turbo - Power Window Switch Replacement (Driver Side Front) - Arlington, Virginia
Replaced switch. Diagnosed problem for follow up repair.

Jacob

12 years of experience
329 reviews
Jacob
12 years of experience
Audi A6 Quattro V6-3.0L Turbo - Water Pump - Dallas, Texas
Again, Jacob came through in a big way. Needed parts replaced so my AC could run properly before the big heat wave and he saved the day. His dedication to his customers and craft are second to none.

Norman

15 years of experience
13 reviews
Norman
15 years of experience
Audi Q7 V6-3.0L Turbo - Car Battery Replacement - Ellicott City, Maryland
It was a great experience! He was very polite and professional and did the job very well-)

Excellent Rating

(2,467)

Rating Summary
2,288
87
19
12
61
2,288
87
19
12
61
Number of Audi services completed
27137+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

P0283 OBD-II Trouble Code: Cylinder 8 Injector Circuit High
P0283 P0283 code definition The P0283 Trouble Code refers to cylinder 8 injector circuit high. What the P0283 code means If the P0283 code appears and is stored on your vehicle, it means that the engine cylinder 8 is not...
P2767 OBD-II Trouble Code: Input/Turbine Speed Sensor B Circuit No Signal
P2767 means there is a problem in the input or turbine speed sensor B due to faulty sensors or solenoids, an electrical issue or transmission fluids.
P0616 OBD-II Trouble Code: Starter Relay Circuit
P0616 means there is an abnormal reading from the starter relay circuit often due too a faulty ignition switch or blown fuse.

Flat spot in motor.

A fixed hesitation point when accelerating points to a specific mechanical issue either in the ignition or fuel system. The mechanical advance in the distributor needs to be checked for free motion and base timing would need to be checked....

water is leaking from my radiator. I have to put antifreeze every other day. I put stop leak but it did not work and my A/C stopped working

If you are losing coolant from your radiator, the radiator will need to be replaced in order to stop the leak. When your coolant level drops past a certain point, the air conditioning will no longer work because the engine...

Vibration you can feel in steering wheel , floor, gear shifter and passenger seat. - 2014 Ford Explorer 4WD

Hi there - I suspect your vibration behavior (https://www.yourmechanic.com/article/what-causes-a-car-to-shake) is caused by driveshaft problems with one or both of the driveshafts. This may be simply an out-of-balance problem, or a mis-aligned or bent driveshaft issue. You should have eliminated bent...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com