Showing articles & questions for topic
P2006

These codes are related to intake air ports not opening and closing at proper times. This can be related to carbon buildup inside the intake, a vacuum leak, or a faulty electric solenoid depending on the setup. I would start...

When you got a 1.6 volt reading from the test you did, this is not a normal test done for this code. Only a proper pinpoint done by a manufacturer approved test procedure would be able to diagnose the system...

Hi there. With having the code P2006 (https://www.yourmechanic.com/article/p2006-obd-ii-trouble-code-intake-manifold-runner-control-stuck-closed-bank-1-by-spencer-clayton) present, check the intake wiring to the runner control and see if there is a good connection. Also, the runners in the intake could be clogged and needs cleaned out. A leaking...