There is only so much that I can tell from this desk. but you will probably be all right. P0011 usually indicates a problem with the variable camshaft timing device. In most cases the car will run without trouble. The...
P0011 (https://www.yourmechanic.com/article/p0011-obd-ii-trouble-code-camshaft-position-a-timing-over-advanced-or-system-performance-bank-1-by-jay-safford) means that the intake camshaft is more advanced than what the ECM has commanded. Typically, the mechanic would resolve this by checking the electrical connectors, wiring, or valve issues for the camshaft oil control valve for the engine's...
Hi there. The code P0011 (https://www.yourmechanic.com/article/p0011-obd-ii-trouble-code-camshaft-position-a-timing-over-advanced-or-system-performance-bank-1-by-jay-safford) is stored for the camshaft position sensor is not registering to the computer. Check the camshaft position sensor and see if its working and plugged in. It is possible that the sensor has failed...
Hello. Thanks for writing in. Replacing the camshaft position sensor was a good call, however the code is more generic and can cover some more serious issues. Since you have made this recent repair, we first want to verify that...
The P0011 code (https://www.yourmechanic.com/article/p0011-obd-ii-trouble-code-camshaft-position-a-timing-over-advanced-or-system-performance-bank-1-by-jay-safford) is typically caused by oil issues with the car. I would particularly make sure the engine oil level is not low. The VVT solenoid relies on proper oil levels to do their job. If they don't...
From the provided description, it sounds like your Nissan Rogue is experiencing a few different concerns. Let us address the concern with the oil leak first. If you are 100% sure that the oil pan is leaking, it is best...
Sometimes you can solve a P0011 by replacing the solenoid, but that is not exactly what the code is for. The code is simply saying that the camshaft timing is too far advanced. The VVT system has some control over...
Hi there. If the code is for P0011 (https://www.yourmechanic.com/article/p0011-obd-ii-trouble-code-camshaft-position-a-timing-over-advanced-or-system-performance-bank-1-by-jay-safford), then there is an issue with the VVTi system. The Variable Valve Timing solenoids (https://www.yourmechanic.com/services/variable-valve-timing-vvt-solenoid-replacement) are not functioning properly. First change the engine oil and filter. Then clear the codes by...
Hello. The trouble codes listed are for two distinctly different issues. P0011 is the trouble code for an issue with the vehicle's camshaft position for bank a, being over advanced. This is often caused by a faulty camshaft position sensor...
Hi there. Through your research you probably discovered that there are multiple causes of a rough idle and the Check Engine Light beyond the VVT solenoid (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-variable-valve-timing-vvt-solenoid). If you replace the second bank solenoid, it may improve your issue, but...
These codes both indicate a problem with the cam sensor for bank 1, or A, on the passenger's side of the engine. Whether the sensor has failed and no other problems exist would need to be verified. I would recommend...
Hi! The code P0011 is generally tied into a vehicles variable valve timing system. The vehicle you have listed, a 2000 Jeep Cherokee with a 4.0L inline 6 motor, did not come with variable valve timing. Being a camshaft reference...
