Showing articles & questions for topic
E420

If the Check Engine light came on in relation to the fuel cap being replaced, then that means it may not be a fuel cap related problem. I would recommend having the vehicle scanned for trouble codes by a knowledgable...

Hello - the AC "charge port (https://www.yourmechanic.com/question/ac-recharge-by-ryan-f)" - which is the low pressure port - is on the driver side of the engine compartment, in-between the ABS pump and the engine. The port has a black or dark blue plastic...

Hi there. That's an interesting concern you've described. With no codes present, verify proper transmission fluid (https://www.yourmechanic.com/services/transmission-fluid-service) condition, level, and type. Once you have verified the fluid type, level, and condition inspect the shift cable connector; usually located toward the...

Hello. I hate to say that this is a common problem, and there really is not alternative way of fixing it. When the top mount wears out, this will occur causing the steering to bind. The only way to fix...

Claimed by John Hege

Hi there. Check the torque converter bolts and make sure that they are installed into the flex plate. The sound is the torque converter hitting the sides of the bell housing. It also could be the flex plate being broke...

Hello. This will only occur if there are other issues with the suspension. If there are any worn out bushings or and corrosion, then the spring can either break and fail or if the other components fail then the spring...

The tumblers are part of the ignition switch assembly on these vehicles. This part must be replaced as a unit. This particular part malfunctioning is a common problem on late 1990's Mercedes Benz products. Have a mechanic who is familiar...