Hi there. There is a resistor for the door locks that keep a voltage on the driver door lock cylinder to activate the secondary door locks electronically. If the resistor is leaking (losing power) it tends to cause the door...
The problem sounds like the door latch or door lock is seized and will not let you open the door. You will need to get in through the passenger door and the inside door panel will need to be removed...
If you door lock motors get out of sync then just hit the unlock button several times to see if all doors unlock and then see if they will lock all together from door switch? If they do not straighten...
Your car does not have the walk away door lock feature. You will have to press your door lock button on remote or door to lock the car. Make sure you do not have any extra remotes or keys in...
If the key will not unlock the door then you may need to have a service to come and unlock the doors for you. I would recommend getting a key cut to open the door and get a key FOB...
Hi there. Check all of the door switches on the door jams. The driver door or passenger front door will cause the doors to unlock after locked if the switch is not working. This is like the driver door open...
Hello - there will be 2 tasks here. The first is to match the door lock(s) with the ignition switch key tumbler if you wish for one key to do everything as a new car would. This can be done...
Hi there. With having the battery cable loose, that caused the computer to reset and lose its memory. I recommend reprogramming the key fob to the vehicle to allow the door locks and ignition to work. First put the key...
Hi there. Take the key fob that unlocks the door and put it up by the column. Press the lock and unlock twice and see if the doors will lock and unlock. If the door locks will not work, then...
Hi there. With the ignition switch off grab the multi function switch and pull it towards you. Hold the switch and turn on the key to run two times. After you shut off the ignition switch, release the multi function...
The handle and lock can come seperate and if lock is damaged then you would need to have the lock rekeyed to your old key or you will have seperate door and ignition key. A dealer or locksmith will have...
You will need to have the brakes and wheel bearings checked to see what is causing the noise. You may have worn out brake pads and it is scrapping on rotor metal to metal or pad sensor is hitting rotors....
Sorry to hear about that. Yes, that is repairable (replaceable) and a certified mechanic from YourMechanic will be glad to perform the repair during a mobile visit. The relevant service to request is door lock cylinder replacement (https://www.yourmechanic.com/services/door-does-not-lock-or-open-inspection). Once on...
Hi there. If the driver door is not locking with the door ajar and the key in the ignition, that is normal. If all of the doors are not engaging the locks with the key in the ignition and the...
Hi there. The door lock cylinder and actuator is not working and needs replaced. You can remove the door panel with the door shut, it just will be a little harder with the lack of space. If you need the...
Hi there. The following steps are how to disable the auto lock feature in your vehicle. Confirm that the vehicle alarm is disarmed. Close all the doors. Make sure that the ignition switch is in the 'OFF' position. Turn the...
Hello there, many common faults will cause your 1995 Subaru Impreza to fail to lock all of the doors intermittently. The first thing to look for in this situation is to inspect the condition of the key, if the key...
Hi there. Check the terminals 4 and 8 for power. If there is no power to any of the terminals, then check the fuse box for any blown fuses to the door lock cylinders. Also, check the door lock switch...
The only way to know exactly what is going on with your door locks is with a diagnosis. This should be done with a test light and a wiring diagram. Since the door locks failed in a progression of one...
Hi there. The door lock cylinder has either an object in side it causing the key to not fit or the pins inside the cylinder has fallen into the key hole. I recommend replacing the door lock cylinder. If you...
