Be sure all sensor elements are clean and unobstructed. According to surveying carried out by "Consumer Reports", the Ford system is among the more reliable in the industry so, based on your description, the accident avoidance system is malfunctioning. The...
The “check fuel fill inlet” warning light means that there is a problem with the fuel tank fill seal. The seal could be missing, loose, damaged, distorted, or there is debris in the fuel fill inlet, and/or there is a...
Hello. If you replaced your transmission and the engine is not starting the first thing I would do is to try to make sure the engine is rotating. You can do this by putting a breaker bar onto the crankshaft...
Hello.It is possible that you could have an alternator issue. Many times when the alternator is going bad, the vehicle will start to have all kinds of strange electrical issues. I would recommend having a qualified mechanic perform a battery...
Hello, thank you for writing in. The first step is to scan the vehicle for diagnostic codes. You can then use those to help you figure out where to turn your attention. Chances are there has been damage to the...
Hello and thanks for your question. There is a misfire detected between cylinder 1 and cylinder 2. The codes P0301 (https://www.yourmechanic.com/article/p0301-obd-ii-trouble-code-cylinder-1-misfire-detected-by-jamahl-walker) and P0302 (https://www.yourmechanic.com/article/p0302-obd-ii-trouble-code-cylinder-2-misfire-detected-by-jamahl-walker) are directly related to cylinder 1 and cylinder 2. The code P0300 (https://www.yourmechanic.com/article/p0300-obd-ii-trouble-code-random-multiple-cylinder-misfire-detected-by-jamahl-walker) means that there...
Hello, Ford (and other manufacturers as well) usually offer the small, specialized electrical parts for repairs such as you describe. Check with www.fordparts.com for your specific needs. For assistance with this project, I would recommend an electrical system problem inspection...
