Chevrolet Tahoe Headlight Bulb Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(10)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(10)

Headlight Bulb Replacement Service

How much does a Headlight Bulb Replacement cost?

On average, the cost for a Chevrolet Tahoe Headlight Bulb Replacement is $155 with $15 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2009 Chevrolet TahoeV8-6.0L HybridService typeHeadlight Bulb - Driver Side Low Beam ReplacementEstimate$217.68Shop/Dealer Price$236.95 - $286.66
2009 Chevrolet TahoeV8-6.2LService typeHeadlight Bulb - Driver Side Low Beam ReplacementEstimate$208.67Shop/Dealer Price$226.17 - $274.56
1996 Chevrolet TahoeV8-5.7LService typeHeadlight Bulb - Passenger Side High Beam ReplacementEstimate$176.59Shop/Dealer Price$186.10 - $210.44
1999 Chevrolet TahoeV8-6.5L Turbo DieselService typeHeadlight Bulb - Passenger Side High Beam ReplacementEstimate$176.59Shop/Dealer Price$186.10 - $210.44
2006 Chevrolet TahoeV8-4.8LService typeHeadlight Bulb - Driver Side High Beam ReplacementEstimate$176.59Shop/Dealer Price$187.57 - $213.02
2010 Chevrolet TahoeV8-5.3LService typeHeadlight Bulb - Passenger Side Low Beam ReplacementEstimate$208.67Shop/Dealer Price$226.34 - $274.85
2007 Chevrolet TahoeV8-5.3LService typeHeadlight Bulb - Passenger Side High Beam ReplacementEstimate$176.59Shop/Dealer Price$186.11 - $210.47
2004 Chevrolet TahoeV8-5.3LService typeHeadlight Bulb - Driver Side Low Beam ReplacementEstimate$176.59Shop/Dealer Price$186.10 - $210.44
Show example Chevrolet Tahoe Headlight Bulb Replacement prices

What are headlight bulbs and how do they work?

Headlight bulbs are encased in a carefully designed housing that illuminates the roadways and makes your car visible to other drivers and pedestrians. They rely on the vehicle’s electrical system for power. There are many types of headlight bulbs in use today including sealed beams, halogen plug-in bulbs, LED (light emitting diode), and HID (high intensity discharge) bulbs. Some car models are sold with headlight options and a mechanic may rely on your car’s VIN to determine the type of headlight system in your vehicle.

All headlamps rely on reflectors in the lamp housing to focus the headlight bulbs. This allows the most useful pattern of light to be cast onto the roadway. Halogen bulbs have a gas that allows for additional light. HID bulbs use two electrodes within the bulb that charge the gas to produce the light. LED bulbs operate at a lower temperature and the light shown on the road tends to be lower than HID bulbs. All headlights are designed to provide a well lit driving path when natural sunlight is not enough.

When to replace headlight bulbs?

  • Bulb is blown out. All of the various headlight bulb types are replaced if the bulb itself has failed. This is the most common scenario.
  • Bulb has dimmed. Some bulb types, particularly halogen bulbs, will produce significantly less light output as the bulb filament ages from use. LED and HID lighting do not dim with age and thus are generally only serviced if the light source has failed.
  • Headlight circuit fails. Note that in some cases, the bulbs are not the underlying issue that leads to the need for replacements. Instead wiring to the bulb, terminal connections, bulb sockets, and system components could be the underlying problem.

How do mechanics replace headlight bulbs?

  • Halogen bulbs and sealed beams, which are generally modular plug in components, are accessible once the hood is raised.
  • The replacement procedure for LED and HID bulbs will depend on whether the light source itself is faulty or if it’s a component in the circuit. Removal procedures for sophisticated HID and LED systems vary by car model and mechanics follow the repair procedures in the factory service manual for your model.
  • For all bulb types, wiring and bulb sockets must be carefully inspected when replacing bulbs to ensure that the electrical connections are complete and secure.
  • Finally, the installed newly bulbs are turned on to ensure normal operation.

Is it safe to drive with a headlight problem?

Headlights must always be fully functional after dusk to drive safely. Should your car have a failed headlight and is driven only when there is adequate daylight, you can put off the repair until it is convenient. Working headlights are required by law in throughout the U.S. whenever the car is used on public roads from sunset to sunrise and in many other specified conditions as well, such as when it is raining or when visibility is reduced due to smoke, fog, or other factors.

When replacing headlights keep in mind:

  • If a bulb does not have a visible filament that can inspected and tested, a mechanic might first test to see if there is power to the bulb. This is most applicable if your car has LED or HID lighting, which can fail if electronics in the circuit is faulty.
  • Halogen lamps and sealed beams should be replaced in pairs so that illumination levels are equal on both sides of the car.
  • Plastic lenses on many headlights degrade over time. Should there not be any issues with the bulbs, these can be replaced to restore your vehicle’s lighting system to a like new condition.
  • The condition of bulb sockets, the ground connection, fuses, and all components of the headlight circuit are important to proper and reliable functioning of the headlights and a mechanic should consider those aspects.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(10)

Rating Summary
10
0
0
0
0
10
0
0
0
0

Excellent Rating

(10)

Rating Summary
10
0
0
0
0
10
0
0
0
0
Number of Chevrolet Tahoe Headlight Bulb Replacement services completed
110+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

P0035 OBD-II Trouble Code: Turbocharger or Supercharger Bypass Valve Control Circuit High
P0035 P0035 trouble code definition P0035 is the code for Turbocharger or Supercharger Bypass Valve Control Circuit High What the P0035 code means It is necessary to understand that each manufacturer has a slightly different definition for this code as...
How to Fix a Dent with a Stud Welder Gun
Accidents Accidents happen, and the only thing to do when fender benders and other automotive mishaps occur is to repair the damage (https://www.yourmechanic.com/article/how-much-does-physical-damage-affect-the-value-of-a-used-car) and move one with your life. Unfortunately, such accidents can take a toll not just on your...
A Buyer’s Guide to the 2012 Audi Q7
When When only the most exacting performance will do, but you want an SUV that delivers third row seating and is comfortable enough for family trips, the 2012 Audi Q7 should be on your list. Key Features While it is...

many powertrain cylinder misfire error codes!!!!!

Hi there. From the description you have given, there are multiple concern that require diagnoses. Most importantly are why the engine has misfires and cooling fans inoperative. The misfiring cylinders (https://www.yourmechanic.com/services/engine-is-misfiring-inspection) and exhaust smoke could be caused by a head...

Hello ben my car is making like a crack noise or some kind of noise everytime i turn and or accelerate. rattling coming from back

Hi Alex. Cracking noises are typically caused by metal to metal contact or a bushing that is pinching between metal components. On the front suspension, there are a few possible sources including steering stabilizer bar bushings, tie rod bushings, lower...

I have a 03 BMW 745i I was running fine untell I park it over night an when I wake up to start the car it crank put don't start

Hi Tevin. Thanks for contacting us tonight. If you can engage the starter (meaning it cranks over) but will not start, then it's either a fuel or ignition system failure. Some of the common components that can cause this include...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com