I drive a 98 lexus gs 300 and it recently failed smog che...


I drive a 98 lexus gs 300 and it recently failed smog check bc the no levels are too high. How much would something like cost to repair Mechanic's Assistant: What specifically didn't pass the test? When was your last oil c...

I drive a 98 lexus gs 300 and it recently failed smog check bc the no levels are too high. How much would something like cost to repair Mechanic's Assistant: What specifically didn't pass the test? When was your last oil change? Dec of last yr my NO Levels are too high and I don't have the codes with me at the moment Mechanic's Assistant: Are you fixing your GS 300 yourself? What have you tried so far? So far I have just called around to a couple of local auto repair shops to get pricing.... i was told $120-$135 just to look at it

Automotive Expert
Hello, my name is \*\*\*\*\* \*\*\*\*\* sorry to see you are having issues. Give me a couple of minutes to review your issue and I will assist you Roy
Automotive Expert
Good morning The price for checking is right in line. It could be either an EGR issue or bad cat converters not reducing the NOX to the correct level. Let me check. Roy Are there any codes present at this time? Roy
Automotive Expert
OK, NOX is controlled by the operation of the EGR valve as it lowers the temperature inside the cylinders to reduce the production of NOX. Then the cat converter take the remaining NOX gases and changes them to harmless gases coming out the tail pipe. Who ever checks it need to see if the EGR system is working as well as the cat converters. Roy

I have my smog reportText or email

File attached (LZ2155M)

Thats what it says on my smog report
Automotive Expert
Thanks. That is high. I would suspect an EGR issue. Are there any codes set? Roy

I'm not sure.... where would I see that on my report?
Automotive Expert
Check engine light. See if it passed. If there were codes, that would have also failed. Roy

My check engine light stays on when I drive and it came on when I got the smog check
Automotive Expert
OK, I need the code that was set. Roy

Where do I find that on my report?
Automotive Expert
I did not see it on the report. You can have a parts store check the codes for free. Then let me know the codes. Roy

Ok thank you
Automotive Expert
You are welcome Roy

What others are asking

Getting code P0446
The code P0446 is most likely due to an inoperative evaporative vent solenoid that will need replacement. The rear axle leak will need to be inspected to see where the leak is for a repair needed. If the rear cover...
Car shaking while accelerating
You could have several issues going on there. I would start by having a mechanic, such as one from YourMechanic, check out the recent work. It is possible for the CV axle nut to have come loose. The noises while...
CEL - P2092 code
There is a high likely hood that the camshaft position actuator for bank 2 is bad. This actuator controls oil flow to a camshaft phaser which controls the engine timing. If there is a malfunction with the timing of the...
The car won't start, battery and starter replaced
Thanks for writing in about your 1997 Lexus SC300. Power at the starter needs to be checked along with all of the connections. When checking connections to the starter, the battery will need to be disconnected to prevent a dangerous...
Mechanic Says its Motor Mount, but...
Hello. The struts have no connection whatsoever with the engine or transmission mounts. At 70,000 miles, it is not likely motor mounts will have failed UNLESS tremendous loads have been consistently put on the engine through, for example, abrupt acceleration....
engine codes related
Hey there. If the codes (https://www.yourmechanic.com/article/how-to-read-and-understand-check-engine-light-codes-by-jason-unrau) are cleared with a scanner, check to see if they return. Maybe the system was serviced or the battery ground is loose and causing the circuit to break which could cause a lack of...
My a/c intermittently blows warm and cold air.
It is possible that your blend door actuator could be failing and going back to the default position. Many vehicles will default the blend door to heat mode. When the blend door actuator fails, it will automatically revert the door...
Clicking sound when turning over.
This may be related to a faulty starter solenoid. The starter solenoid is located on the starter and has internal electrical contacts that transmit electricity to the starter. When this fails, it may cause a clicking sound and will not...
Car is shaking when in idle and shudders as you go through the gears seems better in higher gears?!
A rough idle (https://www.yourmechanic.com/services/car-idle-is-rough-inspection) may be caused by many different things such as low fuel pressure, low voltage to the fuel injectors, dirty fuel injectors, a vacuum leak, a faulty Oxygen sensor or a dirty or failing idle air control...