My car wont sart..my lights come on butt it wont crank pl...


My car wont sart..my lights come on butt it wont crank plus my break and gear shift is tight Mechanic's Assistant: Have you checked the [brake](/topics-brake-dodge/) fluid? How's the level and when was it last changed? I ...

My car wont sart..my lights come on butt it wont crank plus my break and gear shift is tight Mechanic's Assistant: Have you checked the [brake](/topics-brake-dodge/) fluid? How's the level and when was it last changed? I dont know how to check it..plus my start fuel fuse keeps blowing Mechanic's Assistant: What is the make/model/year of your car? 2005 dodge stratus Mechanic's Assistant: Are you fixing your Stratus yourself? What have you tried so far? ¹ Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? And I have to jump it off at least twice a day

Automotive Expert
Hello! Welcome to JustAnswer. Thank you for contacting us for assistance with your Stratus. My name is \*\*\*\*\* \*\*\*\*\* I'll be helping you today. I'm so sorry you are having this issue with your Stratus, I know it can be frustrating. If it won't start and the start fuse keeps blowing, its most likely the starter that is your issue.

why is my breaks so tight and I cant move the gear shift
Automotive Expert
Your brakes are tight because the engine hasn't run so the vacuum assist for the brakes is empty. You can't move the shifter because the brake pedal can't be pushed down far enough to activate the switch that releases the shifter lock.

what can I do
Automotive Expert
You most likely need to replace the starter and the starter fuse.

what do I doOk
Automotive Expert
Let me know if you have any other questions!

What others are asking

Lots of noise on startup, car isn’t a morning person
Hello! Thank you for writing in with this question. Due to the design and characteristics of the “boxer” style engine, this cold-start noise is considered “normal” by Subaru corporate. It may be a good idea to have a professional at...
Hazards and turn signals not working
Hi There, your turn signals and hazard lights share a lot of the same wiring so both of them quitting together is pretty common. You will want to check your bulbs first. I have seen bulbs blow at the same...
Unresolved leakage problems
Have the oil pressure tested (https://www.yourmechanic.com/services/fuel-pump-replacement) to see if it is low, or the oil sensor (https://www.yourmechanic.com/services/oil-pressure-sensor-replacement) is reading wrong. Also have the engine compression tested to see if the cylinder number 2 has a problem or not. The P0302...
Car cranks but wont start
Hello there, many faults can cause your 2003 Nissan Murano to crank but not start. Replacing the battery is a great first step as this is routinely the cause. Other likely faults are the starter, fuel pump, fuel filter, ignition...
Car won't accelerate when I press the gas pedal.
The lack of acceleration or starting may be caused by many different things, but may be a sign of a failing throttle position sensor. The throttle position sensor (TPS) is a sensor used to monitor the throttle position of the...
Electric power steering replacement how much does it cost
From the description you have provided it sounds like it could be, the electric power steering motor has failed. It could also be, an electrical power or ground failure to the power steering motor. Before you have the electric steering...
Car turns over but won't start an has poor compression. 2004 Chevy Cavalier
Hi there - just as an FYI, the cams turn at half crankshaft speed, so seeing them rotate slower than your eyes/brain expects them to is normal. First task is to check for problem codes - whether the Check Engine...
1995 Olds Cutlass Cierra LS stalls while driving
There are many potential causes for your concern. Stalling often means the vehicle is getting too much air or not enough fuel. It can also indicate a problem with the ignition (the crankshaft position sensor is a common problem on...